connector for clay pipe?
I will use this to replace a broken clay gully. This version looks smaller in length and width.The height seems similar, so i think it will work. What connector do i need to connect it to the clay pipe?
Asked by: gibbo253
How wide is this?
I’m planning on having a 150mm gravel trench between my patio and house walls.
Would this fit in the channel under my rain water down pipes?
And could I then cover it in gravel so it’s hidden?
Asked by: Jimbo1981
The width of the debris gully is 163mm.
Answered by: FloPlast Ltd Tech Team
Date published: 2019-09-30
50mm waste pipe?
Could I use this to run 50mm waste pipe from a kitchen sink? Ie, is the hole for the pipe inlet adaptable for a 50mm pipe and if so would I also need an adapter.
I would be running new waste pipe onto the drain so would need p trap also.
Many thanks
Asked by: Phil1983
Yes you could use this product, however the normal rectangular hopper will suffice just as well. Yes you will also need a P trap with either Hopper.
Answered by: FloPlast Ltd Tech Team
Date published: 2019-07-22
Installation depth
Description states 'Install to depths of 10m' but what does that mean?
I would have thought it was designed to be flush with surface for it to be accessible.
Should it be flush or below surface?
Asked by: craign
Yes, the D94 should be installed so that it finishes flush with the surface. The 10m depth is generic for the whole underground system and is mentioned on all underground products.
Answered by: FloPlast Ltd Tech Team
Date published: 2019-12-06
