Browse store

FloPlast 492012 MDPE Coupler 25mm x 25mm (17684)

High quality compression fitting for MDPE pipe. Suitable for use below ground on cold water services. All fittings have a co-polymer polypropylene body, nut and thrust ring, acetal grab ring and nitrile seal. High impact resistant body and nut enables absorption of thermal and mechanical stress. Excellent pressure resistance, tested to 48bar. Simple and quick to connect - no need to dismantle the connecter nor chamfer the pipe, just cut the pipe, lubricate the seal, undo the nut a few turns, insert the pipe liner/insert, push the pipe in as far as it will go, tighten the nut and its done! Comfortably exceeds the performance requirements of UK Water Bylaws Scheme. Certificate number 0507060.

More Info

Bulk Save Save up to 10%
QTY Price per item Saving
1 - 2 £2.84 -
3 + £2.55 Save 10%
£2.84INC VAT

Add to basket for...

FloPlast 492012 MDPE Coupler 25mm x 25mm is rated 4.8 out of 5 by 10.
  • y_2017, m_9, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_17684, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from floplast alkathene joint always use these joints. simple to use and if you lose anything the inside 25mm fittings are interchangeable through different joints
Date published: 2017-08-20
Rated 5 out of 5 by from Perfect Great value for money, very simple and easy to use, nothing more to say
Date published: 2017-06-23
Rated 4 out of 5 by from Re-siting outsde tap Robust and well made -inspired confidence for leak proof underground use. Should include pipe inserts though which have to be bought separately.
Date published: 2016-09-23
Rated 5 out of 5 by from mdpe coupling it is what it is excellent and at a very good price
Date published: 2016-07-14
  • y_2017, m_9, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_17684, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Lube

Hi what lubrication do you use for the seal?, and how much do you apply. Thanks
Asked by: Icantwalkanymore
It should not be necessary to use any lubrication with the MDPE range. Please see the following link to the FloPlast website for installation instructions - http://www.floplast.co.uk/uploads/downloads/Assembly_Instructions.pdf
Answered by: FloPlast Ltd Tech Team
Date published: 2017-08-26

Will this fit old 3/4" alkathene?

Asked by: Retiredtowork
Yes, the MDPE coupler should be ok to use with the Alkathene pipe. However you will need to source appropriate liners for the Alkathene pipe.
Answered by: FloPlast Ltd Tech Team
Date published: 2017-07-29

just to be clear, is that a 25mm thread within each side of the coupler? i.e. will they take 25mm threaded fittings screwed into it?

Asked by: a88a
No, this product is not threaded. It is a compression fitting to suit 25mm outside diameter MDPE pipe.
Answered by: FloPlast Ltd Tech Team
Date published: 2017-05-27

Hi, are these threaded each side?

Asked by: 99999999
Yes, the white threaded section is in both sides of the coupling.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-11-20

can a floplast mdpe coupler code 17684 be used to connect to a lead water pipe

Asked by: cb74
The coupler will not go directly onto lead pipe. You will need a universal adaptor to adapt between the lead pipe and MDPE pipe.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-06-11
  • y_2017, m_9, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_17684, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand FloPlast
Model No 492012
Pack Size 1
Pieces in Pack/Case 1
Product Diameter 25 mm
Product Type MDPE Coupler
Total Product Weight 1.24 kg