Connecting Mira Coda EV Exposed Thermostatic Mixer Shower
I am using these couplers for the installation of my Shower on a solid wall .
Tthe ½ “ thread locks before it seats onto a fibre washer .
Not wanting leakage, would 2 washers seal ok or tap connectors be a better bet.
We cannot offer any installation advice, you will need to contact a suitably qualified tradesperson.
Thank you for using Q & A.
Date published: 2016-11-07
Do I need a male or female coupler?
My cold and hot water feeds to the kitchen tap end with a standard 'shower hose' size male thread. My new Grohe tap ends with a smaller female 'nut' so requires a 15mm male to screw on to. So to convert this, do I need the "male coupler 15mm x 1/2" or do I need the "female coupler 15mm x 1/2"? There's only one picture for each product and both seem to have two nuts and neither have a picture of both ends. in short I'm fitting a European tap to a UK water system. Grateful for the advice and hoping two people vote the same! Cheers, Rob
You will need the Male coupler but you are more than welcome to bring what you can to the trade counter to ensure compatibility.
Thank you for using Q and A.
Date published: 2016-04-27