DeWalt 10mm Extreme 2 HSS Drill Bit
Best drill range around
These DeWalt Extreme drills are outstanding.
There's no need for a centre punch, as the tip holds its position well on start up. They are typically at least twice as fast as conventional HSS bits and the whole team use them as their preferred choice. Worth every penny!
Top Tip: We've found it better to slow the larger drills right down once the main part has started cutting, as they cut more efficiently, overheat less, and don't snatch once they break through. Otherwise they are so sharp that they can pull through suddenly.
16 May 2015
Very good drill bit
I purchased some 40x40x4mm box section for chainlink posts, at 61 I did not relish the thought of drilling the 42 x 10 mm holes for the eye bolts, I saw the reviews for these drills and thought give them a go. I purchased three, used one, really made the job easy using an 18v rechargeable drill . Drilling at low speed with medium pressure went through like a hot knife through butter.
Very pleased with my drills and now have 2 spare for future projects. Eric
14 May 2015
no mucking about
never have to worry about it skating off. So put it on the mark and start drilling.
very sharp but did require more pressure throughout the day . Did all my mild steel drilling and there is still plenty of life left it
23 Jun 2015
This bit was better than expected. It is HSS ground and made in Germany unlike other bits I could mention. Used with cutting fluid these breezed through stainless steel 3mm. I have done 30 holes so far and still looks new. No wandering and cut immediately. I usually use Heller or Gurhing but needed to complete a job quickly. Excellent substitute will go for the 10mm and see how it performs.
3 Jun 2015