Browse store

FloPlast 110mm (51416)

110mm. Accepts 32 to 50mm waste pipe. External waste pipes can be connected directly to a surface water drain or, depending on the design, via a gully trap to the underground drainage system.

  • 110mm uPVC
  • Ring Seal Joints
  • Suitable for Gravity Drainage & Sewerage
  • Install to Depths of 10m
  • Suitable for Gravity Drainage & Sewerage

More Info

£6.79INC VAT

Add to basket for...

Add to saved list...


cap an old rain drainpipe

need for capping a old drainpipe hole thats now inside property. Needs to be flat and water tight. 110mm diameter drain hole.
Asked by: bernardtime
This item will push into 110mm plain ended pipe and give you a water tight joint however it is not a flat fitting. If you are left with a socket showing then you can use a 110mm socket plug (46863).
Answered by: FloPlast Ltd Tech Team
Date published: 2017-05-06

Can this connect directly into a 110mm dia cut 'pipe end' or does it need to be fitted into a spigot socket end ie: an end with a gasket ?

Asked by: Toobusybyfar
The FloPlast waste adaptor pushes straight into plain ended 110mm pipe and does not need a socket or gasket.
Answered by: FloPlast Ltd Tech Team
Date published: 2017-06-07

Would this be suitable from a bath to a wet room drain please thanks

Asked by: Razma88
Yes, this item would be suitable.
Answered by: FloPlast Ltd Tech Team
Date published: 2017-01-01
  • y_2017, m_6, d_23, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_51416, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Brand FloPlast
Construction Material (Plumbing) uPVC
Model No D95
Pack Size 1
Pieces in Pack/Case 1
Product Diameter 110 mm
Suitable System Suitable for Gravity Drainage & Sewerage
Total Product Weight 90 kg


Instruction Manual