Titan Wire Brush Crimp Cup 75mm M14
Stripping paint from Alu
This is ideal for stripping paint off soft aluminium.
I can do a panel or two of the Land Rover before the wire on the brush flies off from metal fatigue. Always use goggles.
It works well on the angle grinder and no too much vibration.
16 Feb 2015
Excessive vibration during us
Works well, but does cause excessive vibration! I completed my job successfully, but would perhaps choose another manufacturer next time. But very good value.
8 Jan 2015
Did the job, till it ran out.
Cant say how long a wire brush spinning at 12,500 rpm is expected to last. This brush did last about 45min to an hour constant use. It was used to remove masonry paint or similar on concrete steps. It was not quick at removing the paint, just slow and steady. The paint was many levels thick easily 3 or more layers
I think its OK for a budget brand
buy a few and return the unused if its a large job
18 Nov 2014
Quality wire brush
I have used many angle grinder brushes over the years and this one fits the bill with respect to longevity against purchase cost
2 Oct 2014