Browse store

Titan Holesaws 15 Piece Set (93131)

Bi-metal holesaws with high-speed steel teeth for cutting mild steel, copper, aluminium, brass, laminates, plastics and timber. Carbon steel arbor and extension.

More Info

£29.99INC VAT
Was £35.99 Save £6.00 (16%)

Add to basket for...

Titan Holesaws 15 Piece Set is rated 4.3 out of 5 by 75.
  • y_2017, m_4, d_22, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_75
  • loc_en_GB, sid_93131, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 4 out of 5 by from Nice holesaws Good price and very easy to use with a good selection of holesaws, does a neat job used on plasterboard and wood.
Date published: 2017-04-04
Rated 3 out of 5 by from Barely did the job I installed a lock on my external door and had to cut a 32 mm hole. The door has metal sheets in both surfaces. I drilled a pilot hole and then drilled each side separately. The 32 mm saw is used with the larger arbor, and it wobbled instead of being fixed. I started cutting the hole and the saw really struggled a lot going through the 1 or 2 mm sheet. Instead of a clean round cut it created a slightly oval oversized one. The lock was installed fine but I expected a cleaner, easier and more accurate cut.
Date published: 2017-03-12
Rated 1 out of 5 by from Bought at 10am, broken by 12pm Purchased this kit on Saturday morning, as I need to drill a couple of holes in my Van to mount a rock n roll bed. After drilling the 2 holes, 5 teeth of the 25mm holesaw were broken off. Probably only good for plastic and wood, and yes, I did follow the RPM guidelines.
Date published: 2017-03-12
Rated 5 out of 5 by from Titan hole kit Neat job with the right tools. Used on floorboards and ceiling plaster boards. Will see how the case lives up to use as the plastic tabs look flimsy.
Date published: 2017-02-21
  • y_2017, m_4, d_22, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_75
  • loc_en_GB, sid_93131, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

I just want to confirm the cutting depth. Question 1 answer from SFPS states 100mm. Can someone confirm if this is correct?

The cutting depth of the holesaw will be the internal depth from the cutting teeth to the back face, surely this is not 100mm? Thanks for any help offered.
Asked by: HowieG
I have this set and I just measured the cutting depth. The maximum depth you can achieve is 1.5" (38mm). What you can do to increase the cutting depth is drill the hole on one side and then drill from the opposite side so that you can achieve 3" cutting depth. One thing for sure, it is definitely not 100mm cutting depth. Hope this helps.
Answered by: MHAli
Date published: 2017-04-19

What is the cutting depth of these pieces?

I am specifically interested in the 64mm piece.
Asked by: TurboRico
Hello TurboRico, the depth is approx. 100mm thank you for using Q and A
Answered by: jboon
Date published: 2016-11-10

What are the sizes

Asked by: Dugs
Hello Dugs, Please see the contents of this kit: 11 x holesaws (19, 22, 25, 32, 35, 38, 44, 51, 57, 64 and 76mm), arbor with 6mm pilot drill for 14-30mm holesaws, arbor with 6mm pilot drill for 32-200mm holesaws, 320mm arbor extension and ejection spring. Thank you for using Q & A.
Answered by: Dcoz
Date published: 2016-10-06

Do you do replacement saws for this set as I need a new 35mm hole saw?

Asked by: Phill1979
Hello, We do not stock the Titan specific saws. However we do do a range of Erbauer saws that will fit. The 35mm saw being code: 72961. I hope this information helps. Thank you for using Q and A.
Answered by: Chubbtonk
Date published: 2016-07-22

can you use them on bricks

Asked by: Trainer1
Hello Trainer1. These are designed for cutting mild steel, copper, aluminium, brass, laminates, plastics and timber, (so not brick). To cut through brick you should be looking at diamond/core drills i.e. Erbauer Diamond Core Drill Kit 8 Pcs (96229). Hope that helps. Thank you for using Q&A. MH
Answered by: marchington
Date published: 2017-02-13
  • y_2017, m_4, d_22, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_GB, sid_93131, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Titan
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 15
Product Height 150 mm
Product Length 350 mm
Product Type Holesaw Kit
Product Width 250 mm
Total Product Weight 2350 kg

15 piece set.

Product contents

11 x holesaws (19, 22, 25, 32, 35, 38, 44, 51, 57, 64 and 76mm), arbor with 6mm pilot drill for 14-30mm holesaws, arbor with 6mm pilot drill for 32-200mm holesaws, 320mm arbor extension and ejection spring.