Hilka Pro-Craft Stud Extractor Set 8 Pieces
Does not work
I bought this to remove a securing screw from a disk brake but the quality of the product meant all that happens is the thread on the stud extractor just wears away. I drilled a bigger pilot hole but still the same with the next stud i tired.
I will be returning this back for a full refund.
13 May 2015
Bought the kit to remove a sheared stud and the removal tool ended up shearing off in the pilot hole without applying too much torque....get what you pay for I guess
14 Dec 2014
Bought this kit specifically for one job but needed a set "just in case" for a long time.
In this instance the smallest of the set was used and removed the offending broken LPG injector from my truck without any problems at all.
The only drawback is the size of the shank to get to grips with if you don't already have a tap and die set where you can use the tap t-bar to grip the shank.
The larger you go the easier it is to find an appropriate spanner to get better leverage.
All in all a good set that I am sure I will make further use of.
3 Jul 2013
These where very poor quality and rounded within the first use.
This is definiately a "you get what you pay for" type of product.
23 Jan 2013