Made from polypropylene, this is a quick and easy way to install waste systems incorporating a push-fit ring seal system. An allowance of a 10mm expansion gap on all push-fit joints is required for the expansion of pipes and fittings in each socket of push-fit systems. Requires no solvent welding or tightening. Manufactured to BS EN 1451-1: 2000 / BS 5254.
|Construction Material (Plumbing)||Polypropylene|
|Pieces in Pack/Case||1|
|Product Diameter||32 mm|
|Product Type||Straight Coupler|
|Total Product Weight||0.03 kg|