Rated 5 out of 5Â by APID BRILLIANT
Was doubtful on these and they are quite expensive but worth it, easy to use, self drilling, self countersinking, although I did drill a pilot hole otherwise there were quite hard and slow to drill in with an impact driver. The 'split' tread works great to pull boards and joists together.
26 Apr 2016
Rated 5 out of 5Â by TomSgt Couldn't recomend them enough!
Absolutally brilliant. I have a house which is about 12 years old and therefore all of the floors upstairs creak (they were nailed down so these have worked loose). I used these in between each nail to secure the floor and it has worked a treat! The floor no longer creaks and they were really easy to use. The T20 head (bit supplied) meant that they did not slip and the fact that they did not need pilot holes / countersinking meant the job was actually quite quick. I would thoroughly recommend them to anyone,
30 Mar 2016
Rated 5 out of 5Â by Jon12 No more squeaking
Brought 2 tubs of these to fix down our squeaking living room floor before we had it re-carpeted. Can't comment on there being no need to pilot/countersink as I did as a precaution.
- Bit comes with box
- Bit never slipped with over 2 boxes worth installed into floor
- Thread at top of shank fastens boards securely, no squeaking since
- Makes the other rooms we haven't had done more noticeable!
We're having another room done in a couple of weeks and I will most definitely be using these again.
2 Mar 2016
Rated 5 out of 5Â by OddJobJ Great for more than floors
Used for chipboard and plywood flooring. Go in so easy, that on the first one I thought I had missed the joist and took the board back up to check. Really pulls the boards down and not a creak to be heard. I use them at 10 cm centres on boards, so about a tub per room. Probably a bit of overkill, but it works well. I have also found them great for wobble kitchen cabinets, bookcases etc. anything that requires two pieces of wood to be pulled tight together
15 Feb 2016