Browse store

Mapei Keraquick Tile Adhesive Grey 5kg (86943)

Rapid-setting interior and exterior wall and floor adhesive. Fixes mosaic, ceramic, porcelain and dark coloured natural stone. Suitable for bathrooms, showers and wet areas. For domestic and commercial use.

  • Use Over Underfloor Heating
  • Non-Slip High Initial Grab
  • Add Latex Plus for Floorboards & Existing Tiles

More Info

Bulk saving available

Qty Price per item
1 - 2 £10.49 (£2.10/Kg)
3 + £9.39 (£1.88/Kg)
£10.49INC VAT (£2.10/Kg)

Add to basket for...

Mapei Keraquick Tile Adhesive Grey 5kg is rated 4.7 out of 5 by 15.
  • y_2017, m_1, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_GB, sid_86943, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Excellent adhesive Very good adhesive which sets fast and can be grouted the same day! 5kg bags don't go far and can work out expensive!! 10kg bag or bigger is the best bet and works out cheaper too but my local screwfix only had 1 in stock.
Date published: 2016-11-17
Rated 3 out of 5 by from Does'nt go far Just done my bathroom floor with this stuff, it mixes up nicely but I needed 2 bags for just 3 square meters.
Date published: 2016-10-07
Rated 5 out of 5 by from Very good product Easy to mix, sets quickly. Great product- not cheap though
Date published: 2015-10-28
Rated 5 out of 5 by from Mapei Keraquick Tile Adhesive Used on a base of old Marley Thermoplastic Tiles Stuck really well I agree with the previous reviewer 5kg does not go very far, best buy a 20 kg bag
Date published: 2015-09-23
  • y_2017, m_1, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_GB, sid_86943, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix
9 Questions  9 Answers

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
Sort by:
7 Nov 2016
Customer avatar
by
Killearn
Read all my Q&A
, Plumbing/Heating Engineer
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
The mixing ratio is 1 x 1.5kg bottle of Mapei Latex Plus (Code: 48884) with 1 x 5kg bag of Keraquick Tile Adhesive grey (Code 86943) or Mapei Keraquick Tile Adhesive white (Code 94867).

Before tiling ensure the existing tiles are solid with no defects and free from any contamination, it may be required to mechanical abrade the surface to remove the surface contamination.
8 Nov 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
24 Oct 2016
Customer avatar
by
Horsham
Read all my Q&A
, Other Trade
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Mapei Keraquick Tile Adhesive Grey 5kg can be used to adhere ceramic, porcelain and moisture stable stone materials around a fireplace. Providing that surface is solid, sound and suitable to receive a tiled finish and is not in contact with temperatures higher than 90 degrees Celsius.
24 Oct 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
i need to fix aqua panel to bad wall's to get a better plumb finish or is there something else i could use on aqua panels that go's off a bit slower so you have more time putting the panels true to plumb,i have council plastered walls (NIGHTMARE).
19 Oct 2016
Customer avatar
by
bridgend
Read all my Q&A
, DIY
+1point
1out of 1found this question helpful.
Was this helpful?Yes1No0

Answers

Answer: 
Mapei Keraquick Tile Adhesive Grey 5kg can be used to adhere tile backer boards to walls and floors. However due to the weight restrictions of a plaster substrates we would advise contacting the board manufacturer for a fixing recommendations as mechanical fixing will most likely be required.
20 Oct 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
12 Oct 2016
Customer avatar
by
Dundee
Read all my Q&A
, Other Trade
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Mapei Keraquick Tile Adhesive Grey can be used with ceramic tiles below 600x600mm onto most substrates such as 15mm exterior grade plywood, render, concrete and screeds.
12 Oct 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
29 Aug 2016
Customer avatar
by
Reading
Read all my Q&A
, Other Trade
0points
2out of 4found this question helpful.
Was this helpful?Yes2No2

Answers

Answer: 
Mapei Keraquick Tile Adhesive Grey can be used to bond ceramic tiles to a timber substrate such as 15mm exterior grade plywood. The substrate must be of a suitably rigid construction with no deflection to cause the tiles to delaminate or the grout to crack.
30 Aug 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
Page : 2 next >>
  • 2016-11-18 T05:39:36.511-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_86943, prod, sort_default
Page : 2 next >>
Specification
Brand Mapei
Colour Grey
Manufacturer Guarantee 5 Year Manufacturer's Guarantee (T&Cs Apply)
Pack Size 1
Pieces in Pack/Case 1
Pieces in Pack/Case 1
Product Type Keraquick Tile Adhesive
Sealant Adhesive Volume 5 kg
Suitable Application Use Over Underfloor Heating
Total Product Weight 5 kg

EN 12004 C2FTS1.

Downloads

Instruction Manual

Safety Data Sheet (COSHH)