Manrose Tumble Dryer Kit 100mm
All you need in one box
All the bits you need for a rear vented tumble dryer where the wall is within approx. 1metre.
The external vent is fine for the job but it's not massive, so cut a fairly decent, 110mm dia, hole for the vent pipe, so that the wall plugs for the external vent's fixing holes don't break out into the vent hole.
The aluminium tube for the wall is multi creased, concertina style, so it's easy to pull to extend as required but remember the creases are on a spiral when you cut it to length which is easy to do with scissors.
The tube to fittings fit was a bit loose so I also sealed them with mastic.
The flex hose is very flexible but consequently the fabric is not very thick, but seems tough enough as I had no splits.
21 Jul 2015
Flexi pipe had a hole in it and is to flimsy to last any time, the bottom flap on the vent sticks , will not open or close without assistance , the only part I used was the wall adaptor utter waste of money it needs redesigning
21 Jul 2015
Great value kit
Everything you need in this kit and great value. Use a corer to make hole in wall / surface and then use this vent kit, straight forward instructions.
4 Jul 2015
Everything that is needed.
I have just installed one of these and it was very simple and practical and it is able to fit to any tumble dryer. It has all the components to make a good fit and cover any poor edges to your wall hole. The only issue i had is that the flexible white hose from the dryer is very weak and does not stay open if pressed against a wall. I therefore discarded this part and use the heavier duty and more rigid original hose. overall a handy kit.
16 Jun 2015