Labgear TV Mast E Cranked
Does the Job
Good value , sturdy and does exactly what it's supposed to do
31 Jul 2014
Does the job
As others have said, it's a bit short / not angled enough for clearance of aerial over roof, which meant I had to bend it - which is the other bad point, it bends a little too easily. I expect I'll need to replace it after the next bad storm, but in fairness, it is doing the job for now.
22 Apr 2014
Purchased this product to mount aerial onto, as needed to clear facia and guttering. Found cranked section to be very short at each end and this led to pole deforming directly U bolt was tightened. Material too thin and of poor quality. Ended up throwing away and purchasing a better, slightly dearer product from another supplier.
15 Jun 2013
used this mast to support a colinear communication ariel . Needed the offset (cranked bend) so that the radials (ground plane) would clear the roof and wall. Initially I thought it was too light and weak, but it is deceptive and served my purpose well.
22 Mar 2013