Irwin Bolt Grip Nut Remover Set 5 Pieces
Did not work
Bought these to remove a 10mm bolt on the inside of the wheel arch of my car, the bolt had been behind a covering and had not been exposed to the elements. The tool only just gripped the bolt and was worse than using mole grips.
7 Apr 2015
These do exactly as described. I was at the stage of giving up as my socket set and breaker bar was just chewing up my car's ball joint bolts. I hammered a 13mm bolt grip on to them and attached a small ratchet, and out they came.
A couple of bolts were a bit more difficult as the bolt grip would just slide off. I think the trick is to start off with a small ratchet and work slowly, allowing the grips to bite down into the metal. Once they're dug in, you can attach a large ratchet or breaker bar and whip them off.
Saved my bacon.
1 Apr 2015
worked for me
Spent nearly a week trying to remove 2 stuck bolts , i brought these and yes they do work. It removed one of the bolts in one go and then i could move the part with a hammer and force the second bolt to break its lock. Very useful tool to have in your toolbox.
25 Mar 2015
A must have for any toolbox, used to remove 3 rusted allen bolts from my motorcycle exhaust, which i was struggling with, had them removed in 2 mins., recommended 10/10
17 Feb 2015