Rated 4 out of 5Â by Golfturbo Door and window frame fixings
I used the 135mm x10mm fixing screws to fit 2 new UPCV doors. The job could not have been more simple. First drill a 10mm hole, (using a 10mm Bosch multipurpose drill bit) through the frame to a depth of 135mm from the surface of the frame. Place the securing screw into the 135mm plug, turn just once, then, using a rubber mallet drive the screw and raw plug into the wall until the lip of the raw plug is flush with the side of the frame. Next, drive the screw fully home until it sits comfortably in the neck of the raw plug. Job done!
Everything went true to plan and these screws are holding the doorframe, with the door in place very securely indeed. It was really that simple!
I must have saved at least a Â£100 in not needing to pay the costs of a professional fitter.
For me both very good products. The Bosch multipurpose drill bit and the plugs/fixing screws are things that I am happy to recommend.
29 Jul 2014
Rated 5 out of 5Â by Dprice19dp Reasonable Fixings
I bought these to fix fence posts to a wall and they done the job perfectly at a really good price.
3 Jul 2014
Rated 4 out of 5Â by Rich1 Good VFM
Does what is expected, at a good price.
There are stronger and heavier duty versions available but for general use cant fault them.
21 Feb 2012
Rated 3 out of 5Â by Robshomemaintenance Soft Heads
These fixings are good value compared to the branded ones. Just make sure you have a good screwdriver bit and a few more than you need. If the bit slips on the screw head it'll probably wreck it. If this happens don't try to tighten again, it just gets worse, best to unscrew it and use a new one.
21 Jan 2012