Browse store

FloPlast D94 Debris Gully (25121)

For use at the base of rainwater downpipes to collect leaves and debris washed down the pipes from the guttering.

  • 110mm PVCu
  • Ring Seal Joints
  • Suitable for Gravity Drainage & Sewerage
  • Install to Depths of 10m

More Info

£16.39INC VAT

Add to basket for...

FloPlast D94 Debris Gully is rated 4.8 out of 5 by 4.
  • y_2017, m_3, d_25, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_25121, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Great Solution Great idea to solve a tricky problem of roof debris clogging drains. Well made, solid and easily fitted. Works well and expect to last many years.
Date published: 2016-03-11
Rated 4 out of 5 by from debris trap This item exactly performs the functions I required ie a guttering down pipe trap for leaves with access, but that was closed off from surface debris/soil. Cheaper than other gullies! Well made, discrete.
Date published: 2016-01-09
Rated 5 out of 5 by from Best fast fix gully 1st one I've fitted, good piece of kit, easy maintenance. Customer very impressed and ordered 3 more. Recommended, definitely be buying a few more.
Date published: 2015-09-28
Rated 5 out of 5 by from great idea these gully.s are the best ives used. they have a lift up lid to gain access to a removable basket which catches all of the leaves and debris and on the other side the plate can be cut to suit the diameter of pipe with pre punched hole on th reverse to make it easier to cut with a knife. unlike other ridable gullies you don't have to remove the bottom section of th pipe to allow access to rods as this can be done at the basket end of the gully.very please with this product and have fitted 7 in total already and think its a great product.
Date published: 2013-12-27
  • y_2017, m_3, d_25, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_25121, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Will this trap take a 110mm rainwater downpipe

Asked by: Woodman43
Yes, the debris gully will accept 110mm pipe.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-12-25

Gully surround?

As this product is 9 by 12 and doesn't fit a standard 9 by 9 gully, what surround should be used for it?
Asked by: Romsey
The debris gully does not require a fixed concrete surround. It sits into the top of a universal gully trap or low back 'P' trap which will be installed underground and it can then be finished at ground level to match the surroundings.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-12-18

Gully surround size?

This product appear to be approx. 9 inch by 12 inch overall. Will this product fit in a 9 inch by 9 inch concrete gully surround, that is, is the 12 inch dimension an overall dimension perhaps including an overhang?
Asked by: Romsey
No, the debris gully will not fit into a concrete gully of 9 inch by 9 inch. The actual measurements of the debris gully are as shown on the Screwfix website.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-12-18

What is the distance between inflow and outflow?

It looks like (from the photo) that a few inches offset will be required. What is the measurement from the centre of the outflow pipe to the centre of the inflow pipe please.
Asked by: kinwafu
The centre marks are 166mm apart.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-07-02

Where is the outlet, is it on the side or the bottom?

Ideally I'd like to feed a hand basin into the top and connect this to clay supersleve pipe from the side. I assume I'll need some kind of coupler to get it to the clay pipe. Does this sound like a plan or can anyone recommend anything more suitable for my needs. Regards Rob
Asked by: robwbf
The outlet is on the bottom of the debris gully. You would also need a connector to go between this fitting and the existing clay pipe.
Answered by: FloPlast Ltd Tech Team
Date published: 2016-06-04
  • y_2017, m_3, d_24, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_25121, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand FloPlast
Construction Material (Plumbing) uPVC
Manufacturer Guarantee 1 Year Guarantee
Model No D94
Pack Size 1
Pieces in Pack/Case 1
Product Depth 301 mm
Product Diameter 110 mm
Product Height 223 mm
Product Type Debris Gully
Suitable System Suitable for Gravity Drainage & Sewerage
Total Product Weight 0.5 kg

W x D x H: x 301 x 223mm.

Downloads

Instruction Manual