Rated 4 out of 5Â by abitofadiyer Confusion in installation book
The installation manual for this pump is a bit confusing. Installation requires the pump to be correctly oriented according to a sequence of diagrams to avoid possible ingress of water. The instructions (Page 8) state, 'Loosen the INTERNAL hexagon screws' and then 'turn the motor housing'. This actually means that the four very visible EXTERNAL allen key screws have to be removed to enable the motor to be re-positioned. A ball-ended allen key helps to do this. Since this is required to effect re-positioning of the motor it is possible to take advantage of this fact to make the whole job much easier by removing the whole front of the pump and install the back section first which is much easier to handle by itself. Fitting the front section is then just a matter of re-fitting it in the correct orientation.
27 Sep 2014
Rated 5 out of 5 Super pump
Purchased a flow master pump that is working great and extremely quiet...super easy to fit as well.
12 Aug 2014
Rated 4 out of 5Â by Joey1234 easy to fit and VERY quiet
Could hardly hear it running and it adjust easy on speed settings
6 Jun 2014
Rated 5 out of 5Â by diamonddave Excellent Product
I have installed many heating pumps over the years. I find this pump easy to install and replacement should be easy as well due to the plug on the wireing. In operation this is the quietist pump I have used and its automatic pressure adjustment is superb and so easy to set using even less power in operation. I reccomend this pump but don't know about it's reliability as I have only just fitted it. The other bonus is that it self purges.
14 May 2013