Hi, I have a number of radiators to put up on dry lined walls. This will be over a couple of weeks or so. Will the resin set if not used all at once? Thanks
You have the use of the resin up to the 'use by' date on the side.
When you are ready to use the resin, all the holes are blown out and brushed, remove the cap and throw away.
Fit the nozzle and squirt the first bit on a piece of card to make sure its mixing.
2/3rds fill the hole an push in the threaded rod.
If you put the gun down, for the gelling time on the cartridge, the nozzle will go hard and seal the tube.
When you want to use it again, remove the nozzle, fit a new one and carry on from the top.
Date published: 2017-03-08