Rated 5 out of 5Â by Euphoria87 Perfect!!!
I have gone through 200 of these, i use these all round the house! Living in a new build, most walls are plasterboard, and these hold everything from shelves to blinds, to radiators, and everything in-between! No problems at all.
I have also used these to hold the majority of a 50" TV up on the wall, along with a heavy duty metal plug on each side, its been up for 3 months, and thankfully no sign of coming down yet!
I would highly recommend these to everyone.
As with other comments, use a 8mm drill bit, and hammer lightly into place.
22 Feb 2016
Rated 5 out of 5Â by Xlr8 The best for plasterboard!
Having tried many fixings for modern plasterboard fitted buildings, I eventually tried these and have found them to be by far the best and my 'go to' choice from now on.
Definitely, only use an 8mm drill bit (NOT 10mm!) and tap them home lightly with a hammer. I would suggest positioning the two legs at the twelve and six o'clock positions to provide the greatest 'hold' and use 4x40mm screws. Finally to tighten, your screw should seat and then pull the legs on the end of the plug to contact the back of the plasterboard. My suggestion would be try one without fitting in the wall first to get an idea on how tight you should go. You definitely don't want to see the plug twist in the wall!
Follow that, and you'll have a secure plasterboard fitting for sure!
8 Feb 2016
Rated 5 out of 5Â by AirDude Great value and really work
Very solid hold in stud walls, much better than I had expected, looks to be strong enough for all but the heaviest duty jobs. I will be swapping to these instead of hollow wall anchors for most jobs now.
As others have said drill an 8mm or 9mm hole and tap into place for best hold. Use 4x40mm screws to secure.
18 Jan 2016
Rated 3 out of 5Â by Grigorofhandsacre Plasterboard plugs
Plugs ok but some screws bite in and pull tight but others don't!! Same screws used. Just have to put a load in. Merry christmas
8 Dec 2015