Browse store

JSP FilterSpec Pro Valve Respirator Black FMP2 (36021)

Unique combination of safety eyewear and disposable respirator for optimum protection. Adjustable elastic harness and padded mask offers maximum comfort. Moulds to face shape for excellent seal. One-piece lens offers optimal coverage. Supplied with 3 x P2 Filters.

  • Anti-Mist & Anti-Scratch Coating
  • Low Breathing Resistance Valve
  • Fully Adjustable Elastic Harness
  • 94% Filter Efficiency
  • One-Piece Clear Lens for Optimal Coverage
  • Can be Used with Prescription (Rx) Eyewear

More Info

£19.99INC VAT

Add to basket for...

JSP FilterSpec Pro Valve Respirator Black FMP2 is rated 3.9 out of 5 by 43.
  • y_2017, m_8, d_14, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_43
  • loc_en_GB, sid_36021, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Rated 5 out of 5 by from Great product Bought this to use while putting up fibre glass insulation. I was using a normal mask and safety specs before but specs steamed up and still got fibres all over my face and in my eyes. This mask was perfect for what I need. No steamed up lens and keeps my face free from fibres. Great product, highly recommended.
Date published: 2017-08-10
Rated 5 out of 5 by from They do the job Have been taking out tiles and plaster in bathroom (small area) and needed this to protect face and lungs from dust. Although got hot wearing it - it did the job
Date published: 2017-07-27
Rated 4 out of 5 by from Good basic face mask I bought this face mask to protect against fine wood dust and metal filings. The mask is comfortable and can be worn for long periods without discomfort. The fit was good and sealed around my mouth/nose and over my eyes. For a first mask it is very good. The price is reasonable and the fact it comes with two spare filter masks is a bonus. My only problem with it is there are cut outs on the sides of the eye protection to allow you to wear glasses under the mask. As I was working on on a small object, I decided to try. My glasses and the mask fogged up immediately, despite the mask claiming to be anti-fog. The work around I found was to detach the mask from the eye protection and just use it on its own along with my glasses, and then refit the goggles afterwards. This was a good buy for me and I am very happy with the mask. The bonus is that I can buy the replacement filter masks from screwfix too.
Date published: 2017-07-25
Rated 1 out of 5 by from VERY DISAPPOINTING I give this product one star, only because I cannot give it ZERO stars. I bought this combined goggles & breathing mask before starting to open up a doorway in a brick wall, using a disc cutter and stitch drilling. I knew this would be very dusty, and I wanted to protect my eyes & breathing whilst keeping my glasses on. This respirator failed miserably. I could either get the goggles on (sort of) over my eyes or get the breathing mask over my mouth & nose. The frame / joint between the two parts was so stiff or fixed that whichever was in place, the other was pushed away leaving a gap for dust & debris to enter. Can be Used with Prescription (Rx) Eyewear: Whilst the goggles have moulded cutouts either side and CAN be worn over glasses, I found that the glasses arms opened up gaps that let dust & debris in. Dust got in and covered the glasses, negating the purpose for buying the goggles in the first place. The rubber-plastic goggles frame would not sit comfortably around my face, I found it too stiff and inflexible to shape to my face / head. This left a gap around my forehead and, once the dust built up with disc cutting, significant amounts of gritty dust got inside the goggles, around my eyes and glasses affecting visibility and forcing me to stop work. One-Piece Clear Lens for Optimal Coverage: Well, it was ok until actually used. The goggles steamed up very quickly once I started work with exhaled breath and perspiration. So much dust & mortar got in that I had to clean them (using water from a garden hose) and wipe them with my T shirt. The inside surface scratched straight away, reducing visibility further. Anti-Mist & Anti-Scratch Coating: NO!!! The goggles lens misted up from the start. The goggles would not sit close enough to my face with or without glasses (even when I removed the mask frame) to prevent exhaled breath from entering and steaming up the goggles. The first attempt at cleaning the goggles (with water and a careful wipe) led to scratching of the internal face of the goggles. Fully Adjustable Elastic Harness: The wide elastic harness for the goggles was very good and easy to use. The two thin elastics supporting the lower breathing mask frame was difficult (impossible) to tighten behind my head, they pulled the rubber frame out of shape and they distorted the respirator mask so much that I either had to let dust into the goggles or the mask. These elastics pulled the mask frame out of shape whichever way I tried tightening them. I could not keep both parts in place. The breathing mask has no support of its own, and is held in the frame with two pathetic rubber-plastic tabs. These did not hold the mask securely and any knock or twist meant that the mask would distort, partially come out or one time it actually fell out. I was continually having to stop work to replace the mask in its holder and try to seal it over my mouth & nose. This was absolutely useless, and eventually I detached the mask frame from the goggles and used the goggles with a separate (non-JSP) mask that had its own harness elastics. However, the goggles continued to steam up and eventually I resorted to just wearing my glasses with the separate mask. Low Breathing Resistance Valve, 94% Filter Efficiency: The filter worked well but kept falling out of the frame holder, and since it was only held in with two useless tabs this meant that it was useless itself. I bought this respirator together with a pack of ten spare masks. The mask are pretty useless since the two tabs on the holder do not hold it securely in place; I'll be returning them to Screwfix and taking back the useless respirator too. I'll stick to masks with their own harness /elastics that stay in place whatever I do.
Date published: 2017-07-20
  • y_2017, m_8, d_14, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_43
  • loc_en_GB, sid_36021, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Can this be used over sun glasses?

Asked by: DrDecorator123
Good morning, unfortunately not, as wearing sunglasses would result in your FilterSpec fitting incorrectly.
Answered by: Anonymous
Date published: 2017-06-19

Is this suitable for working in lofts, moving fibre glass insulation materials?

Asked by: Jamesi65

Is this suitable protection against plaster and brick dust?

Asked by: lewis089
Unfortunately not - this P2 mask is not suitable for protection against plaster and brick dust. We would recommend a high efficiency P3 mask for these contaminants, with eye protection if deemed necessary for the task.
Answered by: PPE Expert
Date published: 2017-06-12

Is this product safe for asbestos removal ?

Asked by: McYeti
No this product should not be used for asbestos removal. For asbestos removal, an assigned protection factor (APF) of 40 is required. This can be achieved by using a full face mask with P3 filters.
Answered by: PPE Expert
Date published: 2017-05-06

Number of uses

How many times can be used? Do you sell spare filters? Thanks
Asked by: Chusta3000
Screwfix do stock our spare filters for the product, FFP2 is coded 53531 and the FFP3 filtares are code 75494. The filters are classified as single use, so after a days use should be replaced. The housing and goggle should offer at least 2 years service depending on how well they are looked after.
Answered by: Anonymous
Date published: 2017-04-11
  • y_2017, m_8, d_14, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_GB, sid_36021, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Anti-Mist Anti-Mist
Anti-Scratch Anti-Scratch
Brand JSP
Clothing Size Description One Size
Construction Material (Safety) Polycarbonate
Filter Code FMP2
Gender Unisex
Manufacturer Guarantee 1 Year Guarantee
Model Name FilterSpec Pro
Model Name/No FilterSpec Pro
Pack Size 1
Parent Colour Black
Pieces in Pack/Case 1
Product Type Valve Respirator Black
Safety Code P2
Valve Type Low Breathing Resistance Valve

Goggles: EN 166.1.B.T, Mask: EN 1827.


Instruction Manual