Rated 5 out of 5Â by mwiggy10 Exact cutting paste
Great stuff! good quality cutting paste, nice easy to use, handy pocket size 'pritstick' type tube that keeps it contained and clean. Used with cobalt drills, spiral flute step drills, taps and dies and even 20/25mm conduit die set. Works a treat, prolongs cutting edge life and speed up the cutting/drilling process. Just a little on the pricey side compared to a 500ml aerosol can of CT90, but not as messy.
12 Jul 2016
Rated 5 out of 5Â by sprotty Required when drilling metal
I'd always used a bit of 3in1 oil or WD 40 when drilling metal, which kind of worked, but then I had a load of issues with drilling stainless steel. So I tried this stuff and its amazing the difference it makes. drills cut straight through cleanly. I should have started using this ages ago, would have saved me a fortune in knackered drill bits.
8 Apr 2016
Rated 5 out of 5Â by GingaPrince Going to use it on all my bits
I drilled a hole in a Transit's roof with a step bit (Erbauer Spiral Flute Step Drill Bit 4-20 mm: 8528D)
Then I drilled a second hole using the Cutting Paste.
Second hole was faster and neater and did not need a file to de-burr it.
The tube will last years and will save me a fortune on new bits.
18 Feb 2016
Rated 5 out of 5Â by PeteEck Pays for itself.
Excelent product. After spoiling several drill bits drilling some 12mm iron bar, getting through a hss bit for every couple of holes without Exact cutting paste. With one 6 mm titanium bit from Screwfix and the cutting paste, drilled 16 ,12 mm bars with one bit which was still going strong at the end.
That is nearly 200mm through rolled iron bar with one bit and the bit was still sharp and showed no heat discolouration.
22 Apr 2015