Browse store
You must be over the age of 18 to purchase this product.

Evo-Stik 528 Industrial Contact Adhesive Transluscent Amber 2.5Ltr (42076)

High strength adhesive with excellent bond strength. For decorative laminates, rigid PVC, wood, chipboard, hardboard, cork, leather, rubber, stone, metal and dense firm fabrics.

  • Bonds on Contact
  • High Shear Strength

More Info

£29.99INC VAT (£12.00/Ltr)

Add to basket for...

Evo-Stik 528 Industrial Contact Adhesive Transluscent Amber 2.5Ltr is rated 4.7 out of 5 by 12.
  • y_2017, m_5, d_24, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_GB, sid_42076, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Paper backed veneer I used this to fix a metre and a half of oak veneer to a stringer on a new staircase.I used baking sheet sellotaped to the spindles for positioning,and adhesive applied with disposable paint brush.It is flat with no bubbles and did not lift on applying a water based finish.
Date published: 2016-11-09
Rated 5 out of 5 by from It's an adhesive, it sticks Spreads easily, drys evenly, bonds well. Works well for a contact adhesive.
Date published: 2016-02-12
Rated 5 out of 5 by from perfect adhesive easy to spread, quick drying time, instant grab superb value for money
Date published: 2016-01-07
Rated 5 out of 5 by from A good adhesive This is an excellent adhesive which is used by arts university students on their model work, prosthetics etc; so needs to be strong and fast drying, simple to use and available in quantity. So far this adhesive comes out top of all those tried. Ordered on line, available for quick and easy collection - no waiting, ready when said.
Date published: 2015-06-05
  • y_2017, m_5, d_24, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_GB, sid_42076, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

will this stick an acrylic sheet to an mdf sheet say both are 60cm x 60cm?

Asked by: acd10
Thank you for your enquiry regarding the above. Evo-Stik 528 would not normally be recommended to bond acrylic sheet because the solvent in the adhesive would affect the acrylic. Sheets less than 3mm would almost certainly warp and thicker sheets would likely suffer stress crazing, whilst this might not be immediately visible is would weaken the sheet which could later crack. The manufacturer of the acrylic may well have a recommended adhesive.
Answered by: Bostik Product Support
Date published: 2017-04-18

does this dry clear?

Asked by: thelongone
The Evo-Stik 528 Adhesive is a solvent based polychloroprene contact adhesive and is beige / amber in colour in the tin. After application in suitable jobs the adhesive dries by the evaporation of the solvent to a hard rubber, but it will remain essentially a beige / brown / amber type of colour. It does not dry clear as such.
Answered by: Bostik Product Support
Date published: 2017-03-18

Will this stick rubber matting to a ply substrate? Lining back of van

Asked by: SwiftyCustom
The Evo-Stik 528 Industrial Contact Adhesive is a solvent based polychloroprene adhesive that dries to a hard rubber after application. The product will bond to many different materials including metal, wood, textiles and most rubbers and plastics. However the product has a maximum in service temperature resistance of + 65 ° C and this temperature will be exceeded in the van during the summer months and so it will consequently de bond in such a situation. As a result the product is not recommended for this particular application.
Answered by: Bostik Product Support
Date published: 2017-02-26

can you stick a metal plate down onto block paviors with this product ? tt

Asked by: charlietheharley
The Evo-Stik 528 Adhesive is a solvent based contact adhesive that can be used for bonding various materials including metal, wood and most plastics and rubbers. Assuming your block paviors are concrete then then the product is not specified for bonding to this type of surface. Also, another consideration is that whilst the product can be used in an exterior application, the bond line will need protecting against water ingress as it is not waterproof as such. Consequently, in this instance the product is not suitable for your application.
Answered by: Bostik Product Support
Date published: 2017-02-26

I need to bond a metal tube into a fibreglass pole. Will this product work or are there alternative adhesives or resins?

Asked by: NAF59
The Evo-Stik 528 Contact Adhesive is solvent based polychloroprene contact adhesive. In general it will bond to metal and fibreglass but as it is a contact adhesive, the normal application method is to apply the adhesive to both surfaces, allow the solvent to evaporate then an instant non adjustable bond is achieved. Assuming you will need to slide the two components into each other, then this adhesive will not be suitable, not even if you applied it to one surface only and bonded whilst the adhesive is still wet as the solvent will not be able to dry as you have two non porous surfaces. There is another product called Evo-Stik Sticks Like Adhesive which is gun applied SMP Polymer type of adhesive that cures by absorbing moisture in the air to a hard rubber so it is not solvent based. It will in general bond fibreglass and metal and needs to be applied to one surface only before bonding and the cure time for the product will be over 24 hours as you have two non porous surfaces and it will only cure from the edges inwards. However the adhesive is a gel type consistency and if the two components are close fitting then the adhesive may get pushed out of the application when bonding.
Answered by: Bostik Product Support
Date published: 2017-01-15
  • y_2017, m_5, d_25, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_GB, sid_42076, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Evo-Stik
Colour Transluscent Amber
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Type 528 Industrial Contact Adhesive
Sealant Adhesive Volume 2.5 Ltr

Hazardous - Delivery unavailable for any offshore location.

Downloads

Instruction Manual

Safety Data Sheet (COSHH)