Earth Rod to Lug Clamp 3/8"
Excellent product but be careful when tightening the brass bolt.
A fraction too much torque and it will shear off.
20 Jan 2015
This is a 9mm rather than a 3/8" fitting and would only fit the rod 28044 after drilling out to 3/8" - that's to say by 0.5mm
22 Oct 2014
do the job
What can I say, does the job at a sensible pricing point
26 Aug 2014
I had the devil's own job getting this to fit over the copper rod that I'd part buried, despite filing off any burrs at the top of the rod. It's a very tight fit, but electrically that's excellent.
I also applied too much torque to the brass nut and bolt and the bolt sheared - clumsy me.
The bolt would probably be OK as long as care is taken not to over tighten.
Easy enough to obtain a new bolt, but inconvenient.
23 Jul 2014