Rated 5 out of 5Â by Indevelopment Great drawer kit
Bought to repair a couple of broken kitchen drawer units. Did the job perfectly & easy to adjust. The only thing that could improve the kit would be to include the screws for the runners. Being in the trade meant this wasn't an issue but for the average DIYer this could cause a bit of an issue.
26 Oct 2015
Rated 5 out of 5Â by jimF71 Exellent replacement
I purchased these drawer runners to replace some existing ones that had "had their day" and these ones proved to be excellent value for money and work extremely well,a very good replacement.
10 Oct 2015
Rated 5 out of 5Â by M16WRD 450mm deep drawer system
After many years finally decided to fit a drawer under my workbench. Could not be simpler as the drawer sides come with the rails. Cut the bottom, back and front (make it sturdy and you can go very wide) and fitted 50 x 50 timber supports under the bench. Within half an hour all my bits and bobs were safely stored away and readily to hand. Screws not a problem as I keep my stock topped up. Grab packs ideal. Just remember to shut them properly before setting of or you will be on your hands and knees for ages. Thanks must go to Natasha for picking up and sorting - again!
20 Jul 2015
Rated 4 out of 5Â by properjob123 Good value runners
The runners are very good value but need a small improvement....the material is pressed steel and the space between the drawer side and the cabinet runner is so tight that a CS screw must be used. The holes in the cabinet runner are not countersunk so the screw selection is critical. The screws should be provided with the runners.
17 Dec 2014