Browse store

Polytank Cold Water Tank 25gallon (UK) 690 x 515 x 520mm (10500)

25 gallon tank with lid. Suitable for new builds and as a replacement tank. Supplied with all fittings stored inside the tank and factory sealed.

More Info

£84.99INC VAT

Add to basket for...

Polytank Cold Water Tank 25gallon (UK) 690 x 515 x 520mm is rated 4.8 out of 5 by 36.
  • y_2017, m_8, d_14, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_en_GB, sid_10500, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Polytank Installation Screwfix were great when I had to take the unopened original tank back as, although it went through the loft hatch, it could not be maneuvered once up there. So, my advice would be to check the tank can be placed into position before opening. As a DIYer, the instuctions are tailored for anyone to follow and they state to use a hole cutter of two sizes, 27mm and 29mm, so ensure you have these before you start work. Installing it was easy, but beware you will also need a tank connector tool to hold the dogs on the fittings, or, a cheaper solution would be to buy alternative tank connectors which have an internal hex nut instead. Other than that, everything is included except insulation for the top of the tank, but I had the insulation left over from the old tank to complete the job. Carefully clean out any swarf with a damp cloth before filling unlike the one I took out which was full of all sorts of gunk.
Date published: 2017-07-02
Rated 4 out of 5 by from Polytank 515x515x530 Customer said a 24inch circular tank was leaking by the outlet and could see a crack. I gambled and bought this tank that should fit through a loft hole in a house built within the last 60 years or so. Great that everything is in the tank and it fitted a dream. New tank should last well beyond it`s new owners.
Date published: 2017-03-25
Rated 5 out of 5 by from A good robust CWF polytank Just managed to squeeze it into the loft after removing the opening surround i.e. check loft opening before buying! This tank is a lot more robust looking than the one it replaced and that had served for over 40 years so this should last forever. It was very easy to install though I had to overcome some difficulties caused by myself. Everything connected well after following the instruction leaflet which has all the details that you need. At the time I wasn't well and very tired and cutting the main water feed without turning off the supply would have been a laugh to watch and you know it's difficult to completely stop a drip from the ball valve water supply elbow when you forget the fibre washer! I used to be competent once, honest.
Date published: 2016-10-21
Rated 5 out of 5 by from Solid tank at a good price A well made tank, much more robust than many of the plastic tanks i have seen. All the fittings included, including the inlet reinforcing required these days, so you are ready to go. The ballcock valve and tank connector appear to be quality made so all in all, it should last a long while before any servicing.
Date published: 2016-10-13
  • y_2017, m_8, d_14, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_en_GB, sid_10500, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

What height for outlet pipes

The instructions say 50mm from bottom of tank for the outlet pipes, is this 50mm to the centre of the hole or to the 50mm to the bottom of the hole?
Asked by: jcs123

can this tank be used to supply water to an electric shower?

Asked by: willowman
No. An electric shower needs a mains pressure supply.
Answered by: Blotto
Date published: 2017-07-08

does the size of tank affect the water pressure from 50gal to 25gals

Asked by: dextra
If the tops of the tanks are at the same level, then the water pressure will be the same.
Answered by: Blotto
Date published: 2017-07-08

does this come with the insulation jacket as pictured as not listed in the contents list

Asked by: ogsplumbing
  • y_2017, m_8, d_14, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_GB, sid_10500, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Polytank
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Height 520 mm
Product Length 690 mm
Product Type Cold Water Tank
Product Width 515 mm
Tank Capacity 25 gallon (UK)
Total Product Weight 7.34 kg

L x W x H: 690 x 515 x 520mm. Weight: 7.34kg.

Product contents

Byelaw 30 fittings kit. Part 2 ball valve with float, ball valve, backplate, 22mm compression tank connector, 15mm x ½" angled service valve, plastic support and rubber sealing washer insulation.