Rated 5 out of 5Â by Bodhi Brilliant!
I have just finished revamping our bathroom, and needed a way of installing a bar valve. Having looked into the best way to do this, I decided on one of these.
It was one of the best decisions I made, its brilliantly simple, and gives a solid mount to attach the valve.
The only worry I had was trying to cut the tiles around the 45mm diameter raised edge.....although this turned out to be fine with the purchase of a 50mm tile cutter....
26 Apr 2016
Rated 5 out of 5Â by Tunvan Boss
Great product, well designed and easy to install. Good valve compared to other similar products that are more complicated to install.
23 Apr 2016
Rated 4 out of 5Â by ToolbeltD Good Bit of Kit
Better than most other fixing kits. Good quality brass fittings and well designed nylon bracket too. The bracket is 3mm thick so make allowances when tiling up to it and you will need to cut two 55mm diameter holes for the outlets - I used a 13295 hole cutter which worked a treat. You can buy this kit on eBay for Â£10.
9 Apr 2016
Rated 2 out of 5Â by Hufty2 55mm tile drill needed
They're fine, do the job and are easy to fit to a stud wall without needing too much extra wood but if you've got porcelain tiles you might have a problem or an expense at least cutting 55mm diameter holes in the tiles. Other fixing kits might be better then - the Bristan 10 kit for example only needs a 15mm hole for each pipe and 5/6mm holes through the tiles for the screws.
2 Feb 2016