Browse store

Zinsser Self-Priming Paint White 2.5Ltr (62096)

Guaranteed to prevent the growth of mould and mildew on paint film for at least 5 years. Perfect for brightening ceilings, walls, trims and other paintable interior surfaces. Ensure surfaces are mould-free before application. Covers approx. 10m²/Ltr.

  • Touch-Dry in 30 Minutes
  • Lifetime Durability Guarantee
  • Sticks to Surface without Sanding
  • Fade Resistant
  • Water-Based & Low Odour
  • Tintable to Off-White & Medium Colours

More Info

£34.95INC VAT (£13.98/Ltr)

Add to basket for...

Zinsser Self-Priming Paint White 2.5Ltr is rated 4.6 out of 5 by 51.
  • y_2017, m_8, d_18, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_51
  • loc_en_GB, sid_62096, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from One coat does it. Quality paint goes on smoothly and covers well in one coat would highly recommend.
Date published: 2017-08-12
Rated 5 out of 5 by from Projects. Needed a paint for several household projects and this saved me from buying several different products. Used to revamp an old wooden cabinet, cover over previously painted stair rails and had enough left to paint the bathroom ceiling. Not cheap, but coverage was good. Recommended.
Date published: 2017-07-15
Rated 1 out of 5 by from Rubbish 3 coats on white pre primed doors and still prolly needs another 3 to fully cover,it took 7 coats plus a coat of dulux oil based undercoat to cover light oak stained skirtings,how people are saying 2 coats and the jobs finished is beyond me
Date published: 2017-06-17
Rated 1 out of 5 by from Not happy Just tried to use this in our spare room and as I'm rollering it on the wall if I go over the same bit it comes off the wall. The paint I'm trying to cover is only a pale yellow satin emulsion so I can't see a problem there. After all the hype about this stuff,what a waste of money.
Date published: 2017-06-07
  • y_2017, m_8, d_18, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_51
  • loc_en_GB, sid_62096, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Can this be used on bare MDF?

Or will I need to use BIN first?
Asked by: DoItYourself1689
Hi. Thank you for your enquiry. Our best recommendation for this particular surface would be to apply a coat of the B-I-N primer (1 litre = 29661, 2.5 litre = 10130 or 5 litre = 3298G) first to seal the surface then apply 2 coats of the Perma-White for a long lasting, durable, non-yellowing finish. I Hope this helps.
Answered by: Zinsser Product Support
Date published: 2017-08-03

Will this paint cover the knots on varnished Pine?

Asked by: Flossie17
Hi Flossie 17. Thanks for your enquiry. To completely block the knots from bleeding through we would suggest sealing them first with Zinsser B-I-N then apply a full coat to complete seal the entire surface. Once the B-I-N has completely dry (minimum of 45 minutes) you can then apply the Perma-White, 2 coats are recommend to achieve a durable, long lasting, non-yellowing final finish. Before application of the above it would be good working practice to ensure that the surface has been prepared sufficiently i.e., with hot soapy water then rinsed with fresh warm water to remove detergent and when dry a good wipe with methylated spirit. I hope this helps.
Answered by: Zinsser Product Support
Date published: 2017-08-03

Is this suitable for painting interior doors?

I want to paint dark brown flush internal doors white. Can I use this paint directly on the doors to cover the brown or is a primer needed first? Thanks
Asked by: TFoin
Hello, thank you for your enquiry. Usually this type of surface is manufactured using a laminate, due to a door being a high wear area and laminate being a difficult surface to get a paint to key to our best recommendations are to apply a primer such as the Zinsser B-I-N Primer first, ( 29961) this will help to achieve a better key, to resist peeling and flaking. For best results clean the surface well ( we recommend with hot water and liquid detergent, rinse with warm water to remove any soap, then when dry a final wipe with methylated spirit) prior to applying the B-I-N Primer with a brush or roller, the B-I-N Primer can be over coated with the Zinsser Self Priming Paint after a minimum of 45 minutes, allowing to complete your project in record time. We trust this information helps
Answered by: Zinsser Product Support
Date published: 2017-07-18

is this product suitable to use on new wood with out any primer or undercoat? will the knots show through?

Asked by: HiFi9
Hi, thank you for your enquiry. For optimum results we would recommend priming new bare wood that has knots with the Zinsser B-I-N primer (29661) to seal the knots and any tannin bleed from spoiling the decorative finish. Our best recommendations are to remove excess resin from the knots with a hot air stripper followed by wiping with methylated spirit, spot prime the knots with B-I-N Primer, allow the B-I-N to dry for minimum of 45 minutes before applying a full coat of B-I-N Primer, again allowing a minimum of 45 minutes before applying the Zinsser Self Priming Paint Satin Finish in 2 coats, allowing a minimum of 2 hours between coats. We trust this information is helpful
Answered by: Zinsser Product Support
Date published: 2017-08-14

Is Zinseer self priming paint suitable for wooden fire surrounds?

The fire surround is around an inset gas fire. Will the paint discolour?
Asked by: Nightman1
Hi Nightman1. Thank you for your recent enquiry. Perma-White can be applied to surfaces where the temperature achieved is warm enough to touch with your hand or is no more than the temperature what is produced by a radiator for example. 2 coats of Perma-White are recommended. The first coat will prime and seal the surface and the second coat will seal the system and provide a durable, long lasting, non-yellowing finish. Always ensure that the surface has prepared sufficiently i.e., with hot soapy water then rinsed with fresh warm water to remove detergent and when dry a good wipe with methylated spirit. Hope this helps.
Answered by: Zinsser Product Support
Date published: 2017-08-12
  • y_2017, m_8, d_18, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_en_GB, sid_62096, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Zinsser
Coating & Finishes Drying Time Touch-Dry in 30 Minutes
Coating & Finishing Type Satin
Coating Finishing Volume 2.5 Ltr
Colour White
Manufacturer Guarantee 5 Year Manufacturer's Guarantee (T&Cs Apply)
Model No ZN7050001C1
Pack Size 1
Parent Colour White
Pieces in Pack/Case 1
Product Diameter 156 mm
Product Height 158 mm
Product Type Self-Priming Paint
Volume 2.5 Ltr

Downloads

Safety Data Sheet (COSHH)