Rated 5 out of 5Â by Perranpete Cheaper to use this than a Tee
This got me out of a problem in a tight airing cupboard where I could not use a soldered fitting and was cheaper to use with a standard TEE Than buying the special 22x22x15mm TEE
24 Sep 2016
Rated 4 out of 5Â by ShropshireBlade Works OK, tighten fully
I read through several reviews before using this compression fitting to take a 22mm elbow down to accept a 15mm copper pipe. You do not use an olive, this reducer does that job, so you can put the 22mm olive from the compression fitting to one side for another job. I put some of the excellent Fernox LS-X around the reducer then put the reducer into the 22mm fitting, then pushed in the 15mm pipe. Some Fernox LS-X or liquid PTFE on the compression fitting threads then tighten but for it to work you do need to hear the 'click' as the ring let's go, then tighten a bit more.
29 Feb 2016
Rated 1 out of 5Â by Colmech Pants
I bought these to replace used ones on a pressure reducing valve. Impossible to get a water tight seal!
Fitting reducers worked perfectly first time, lesson learned.
12 Jan 2016
Rated 4 out of 5Â by Edwards0101 does the job ok.
Does the job ok but needs a lot of force to close it.
29 Jul 2015