Browse store

Prysmian PUJ2CC Resin Joint Kit 2.5mm² 4-Core Max (61439)

600/1000V. Low voltage, straight-on cable Prysmian cast resin joints. Made from JEM resin.

  • Enclosed Mixing System
  • Easy to Mix & Flows Well

More Info

£11.99INC VAT

Add to basket for...

Rated 4.8 out of 5 by 8 reviewers.
  • 2016-07-29 T11:31:14.681-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_61439, prod, sort_default

Add to saved list...

Save
Rated 5 out of 5 by First time for a resin joint Ive seen these used many times before, but never before used it myself. Well the jointing was easy, the instructions were very clear. 1 tip I would give, which a friend in the trade gave me was to do a dry run first. I'm fortunate to have the correct crimping pliers these are a must to do the job. All in all an easy way to make a permanent joint which you can bury in confidence. In total it took about 1 hour to complete, I left the resin overnight, but I think it set in about 2 hours. 13 Jun 2016
Rated 4 out of 5 by Overall very good product Bought this to join 4-core 4mm SWA cable knowing that the enclosed crimps would be too small. Decided to use good quality terminal block to join cores as there was plenty of room, to fit the terminal block in the plastic shell and didn't see the point in paying a LOT extra for the next larger size Prysmian product.. Resin mixed easily, poured well and there was plenty to do the job. It set hard in about 2 hours in fairly cool outdoor temperature. End result was perfect. I would recommend this product. Cons|: Wire springs to retain the wire armour were fiddly and I would use a jubilee clip next time. There is plenty of room to join larger cables up to 4mm core size - it's a pity they don't include larger crimps given the price of the product. 15 Apr 2016
Rated 5 out of 5 by SWA Underground Joint Excellent cable joint. The kit gives you everything you need with plenty to spare. The resin mixes easily, liquid and powder, flows well and has a good working time before it sets. The earth link is a flexible braid which secures well under the spring clamps, better than some. Overall I would say this is the better of the makes of resin filled joints I have used. Difficult to say about reliability but no reason to suspect that it wouldn't be reliable if assembled correctly. 29 Mar 2016
Rated 5 out of 5 by Good underground joint kit Used quite a few of these joint kits with no problems we have recently replaced a number of existing joints that were joined with swa glands and conduit boxes - if you have got any cables to join underground this is the only joint kit to use as it will last for years underground . Read the instructions for the resin carefully as it is two part one is a clear liquid and the other is like a fine sand - it sets quickly so make sure the joint is ready to fill before mixing. 7 Jul 2015
  • 2016-07-29 T11:31:14.681-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_8, tr_8
  • loc_en_US, sid_61439, prod, sort_default
Page : 2 next>
3 Questions  3 Answers

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
Sort by:
12 Jan 2016
Customer avatar
by
London
Read all my Q&A
, Electrician
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Supplied Carton is 210 x 180 x 80(mm). The completed joint is approximately 185 x 45 x 55 (mm).
13 Jan 2016
+1point
1of 1found this answer helpful.
Was this helpful?Yes1No0
17 Dec 2015
Customer avatar
by
Milton keynes
Read all my Q&A
, Electrician
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Hi Tommy,

The PUJ2CC will work with any cable upto 4 core between 1.0 and 6.0mm² providing the cable diameter is between 12 and 22mm diameter.

It is supplied with Blue crimp splices that work between 1.0 and 2.5mm² and a yellow crimp which works at 4.0 to 6.0mm² .

Regards

Stu
21 Dec 2015
+7points
7of 7found this answer helpful.
Was this helpful?Yes7No0
17 Sep 2015
Customer avatar
by
Great Dunmow
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
No, you would require the PUJ6CC as connectors within the 2CC kit will only reach 2mm².
Regards

Stu
22 Sep 2015
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
1 of 1
  • 2016-07-29 T11:17:39.204-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_61439, prod, sort_default
1 of 1
Specification
Brand Prysmian
Manufacturer Guarantee 1 years
Model No PUJ2CC
Pack Size 1
Pieces in Pack/Case 1
Total Product Weight 0.762 kg

Suitable for 600/1000V polymeric insulated copper conductors with SWA (steel wired armoured) cables to BS 6346, BS 5467 and IEC 502.

Product contents

Armour bonds included.

Downloads

Safety Data Sheet (COSHH)