Pneumatic Wheel 360mm Diameter
A good replacement
The pneumatic tyre proved a good replacement for my Haemmerlin wheelbarrow, however the 13mm and 25mm bore adaptors needed some adapting to fit the 10mm axle on the wheelbarrow. I had to drive the sleeve out of the old wheel clean it up and use this to bring the bore size up to 13mm. That done it works well. I cannot comment on the long term reliability as I only fitted this two days ago, but it has shifted about 20 loads of ready mix, without complaint, so has already earned it's keep. A greater range of adaptors would be good, alternatively, a 13mm 150mm axle!
29 Jul 2015
Great replacement wheel
I tried to use some of that liquid repair to fix a punctured wheel, but lasted 10 minutes and failed. So I purchased one of these wheels and was able to fit it easily. Could do with a couple of spacers to centre the wheel on the axle, but still works fine even with the wheel moving around a little. Saves throwing away a perfectly good barrow.
26 Jul 2015
so much quicker and easier then trying to repair an inner tube. Just fit a new wheel
has useful optional bushes for different axle sizes, but needed some M10 washers as spacers for a better fit between the forks
11 Jul 2015
does the job - cheaper than a new barrow!
BUT; it won`t fit all barrow wheel shafts - check first
12 Jun 2015