Rated 5 out of 5Â by ElecsAndy Requires a combiner too!
This module has 2 cable entries -
One links directly to Sat 2 socket.
One is to a splitter circuit (inside the metal cover) which connects to the TV, Radio and Sat 1 sockets.
In the loft, or somewhere convenient, you need a combiner to merge the TV aerial and one satellite cable into one cable which then goes to this box. It saves running a separate cable.
The second sat connector is direct from the dish for SKY+, or you can use it for something else, like sending the output of Sky box to another room.
I hope this helps!
27 Dec 2014
Rated 2 out of 5Â by dawndriver Not what it appears to be.
The one I received was faulty (internal short) however it would have went back anyway. As most installations these day are twin satellite cables I thought this would tidy my wires up, I was wrong. It has 2 satellite outputs plus TV and radio, however there are only 2 inputs to the rear, now unless I'm missing something I cannot see how you can have RF terrestrial signal coming through a satellite dish because the 2 inputs to the rear supply the 2 satellite outputs at the front, I checked the with a meter. So unless mine was faulty in more ways than one I cannot see the point of it.
3 May 2014
Rated 5 out of 5Â by BigDogSeal LAP tv fm & 2 satellite module
Needed to tidy all the satellite cables and tv cable instead of having numerous face plates. This does the job perfectly, good design.
30 Apr 2014