Energer 2000W 4Ltr Wallpaper Stripper 240V
A wouldn't-be-without-it tool
An excellent machine.
1) Save heating-up time by filling it with boiling water from the kettle.
2) If the overheat cut-out operates (eg when boiling dry) reset the cut-out by filling with cold water to cool it (it takes AGES to cool down and reset on its own). The cold water resets the cut-out, and then you can empty it out and fill it with hot water again.
One improvement might be Its own on-off switch, or a mains-on light..
16 Dec 2014
packed up after 1st use
Used it for 4 hours, the next time I used it a month later it was bust and would not heat. The Steamer plate is flimsy and warped under pressure on wall reducing effective seal.
14 Dec 2014
Simple & Effective
Not much to say other than it does exactly what it claims to do. Heats up smartly and shifts heavy wallpaper as easily as you could reasonably hope for. Nice & light, with a decent length of hose makes it easy & non tiring to use. Much more efficient than the old one it replaced.
30 Nov 2014
It can't be better!
We've just bought a house with wallpaper everywhere and my wife hates wallpaper! so I've used this wallpaper stripper a lot!. It's perfect!. I would recommend it to anyone.
21 Nov 2014