Zinsser Ceiling Pro 5-in-1 Paint White 2.5Ltr (6298P)

£ 35.99INC VAT

Add to basket for...

Zinsser Ceiling Pro 5-in-1 Paint White 2.5Ltr (6298P)

Effortlessly provides a perfectly finished, non-yellowing ceiling. Adheres to any surface, seals stains (including water and smoke stains), primes and finishes whilst bridging hairline cracks. Contains a biocide that protects the dried coating against fungal degradation, prolonging life. Low odour and ultra low VOC content. Suitable for bare and previously painted ceilings. Dries in 30 minutes, recoat in 1 hour.

  • Touch-Dry in 30 Minutes
  • Recoat in 1 Hour
  • High Hiding Stain Sealer
  • Low Odour
  • Water-Based
  • Ultra Low VOC Content

More Info

View all: Zinsser Specialist Paints

£35.99INC VAT (£14.40/Ltr)

Add to basket for...

Zinsser Ceiling Pro 5-in-1 Paint White 2.5Ltr is rated 3.2 out of 5 by 10.
  • y_2021, m_5, d_7, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_6298P, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 17ms
  • REVIEWS, PRODUCT

Add to saved list...

Save
Rated 5 out of 5 by from Covered well Well after reading the mixed reviews above I was a little concerned about this zinsser paint. But after a really and I mean really good stir I started to roll it on the ceiling. The first thing I noticed there was no staying of paint coming off the roller not 1. Bonus for a start, then it covered the ceiling in one coat including a patch of fresh plaster. I will definitely recommend and buy this again. But it does need a good stir first.
Date published: 2021-02-15
Rated 1 out of 5 by from Doesn't cover hairline cracks This paint might prime, but it doesn't cover cracks at all. Clearly visible hairline crack after applying and drying. Very messy - drips a lot. After drying, the finish doesn't look very white or bright. Will go over it with white silk emulsion. Reliability is really n/a, so awarded 3*
Date published: 2019-11-21
Rated 1 out of 5 by from Not worth the money Bought to prime ceiling that hadn't been paint in years. Thoughly cleaned ceiling and followed instructions on the can. After two coats and 24 hours drying time ceiling was looking worse than before using this product.
Date published: 2019-03-19
Rated 4 out of 5 by from Still need primer Bought this for bathroom ceiling - prepped it and applied but started to crack within a week - was supposed to seal and prime but didn't. So had to do that then reapply. Good think paint with good coverage.
Date published: 2019-02-17
  • y_2021, m_5, d_7, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_GB, sid_6298P, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 25ms
  • REVIEWS, PRODUCT

Can I use this paint on bathroom ceiling cladding?

Asked by: Thisisdaft2020
Hello Thank you for your recent enquiry. Ceiling Pro 5-in-1 Paint would be perfect for applying to a timber clad bathroom ceiling and should be applied by brush or roller at a coverage rate of approximately 10m2/litre. One coat of the paint should be applied unless there is staining or you are covering a dark surface, in which case a second coat should be applied after 1 hour in normal drying conditions. If this is over pine cladding with knots, these areas should be taken back to bare and the knots spot primed with BIN primer/sealer (29661) to prevent bleed through of any resins. Once the BIN primer has dried, typically after 45 minutes, you can apply the coat of Ceiling Pro 5-in-1. To ensure the best adhesion for the paint, we recommend the areas is sound, clean and dry. To achieve this any loose or flaking previous coating shoudl be taken back to a sound finish. Once this has been achieved we recommend cleaning with hot soapy water, rinsing with warm water then wiping over with methylated spirits if possible. When the ceiling has dried, the paint or primer may be applied. I hope this helps.
Answered by: Zinsser Product Support
Date published: 2020-11-01

Will I need to apply B-I-N first to blcok mould stains? Also will this paint inhibit mould growth?

Asked by: Picard
Hi. Thank you for your enquiry. If you are left with mould staining after treating/killing off the mould you will not require a dedicated stain blocker such as B-I-N. The Ceiling Pro is an all-in-one product. It primes, seals, blocks stain, bridges hairline cracks and provides a flawless finish. It also contains a biocide, this will prevent mould from growing on the dried surface. I hope this helps.
Answered by: Zinsser Product Support
Date published: 2020-09-23

Hi can this paint be used direct to a newly plastered ceiling

Asked by: Steven1234
Hello Steven1234 Thank you for your recent enquiry. Ceiling Pro 5-in-1 is can be applied directly to the new plaster, providing this has fully cured as per the manufactures instructions. One of the five qualities of the product is that it is a sealer along with being a primer and top coat combined. Usually one coat of the product is required, however as this will be applied to a porous surface on this occasion 2 coats may need to be used. The product may be applied by brush or roller at a coverage rate of approximately 10m2/litre. I hope this helps.
Answered by: Zinsser Product Support
Date published: 2020-09-19

Rubbing down needed?

Hi, we'd like to paint a ceiling which is clad in T&G boards which have been painted dark brown. Do we need to rub the previous paint down first or will just sugar soaping do it? And is it likely that 2 coats will do the job?
Asked by: Splicer
Hi. Thank you for your recent enquiry. Typically the Ceiling Pro 5-in-1 is for application to very porous areas. Our best recommendation for this particular project would be the Zinsser B-I-N primer sealer (1 litre = 29661, 2.5 litre = 10130 or 5 litre = 3298G). It has unparalleled adhesion to any surface providing great key without having to scuff sand. 1 or 2 coats of B-I-N primer is recommended, to be applied by brush or roller at a coverage rate of approx. 10m²/L/coat. Always ensure that the surface has been prepared sufficiently i.e., with hot soapy water then rinsed with fresh warm water to remove detergent and when dry a good wipe with methylated spirit. You can finish off the B-I-N primer with any conventional decorative finish, this can be oil or water based. I hope this information is of use.
Answered by: Zinsser Product Support
Date published: 2020-03-04

do i need to use peel stop before i use this or does this paint do the same as peel stop

Asked by: zdzzdzdzdz
Hi. Thank you for your enquiry. The Zinsser Peel Stop is recommended for application to existing paint problems and is not intended to be left as a final finish. If the surface you are painting is cracking or crazing then this will solve the problem before applying your chosen top coat, oil or water based. The Ceiling Pro 5-in-1 can be applied to both bare and previously painted surfaces. It will prime, seal and even bridge hair line gaps, this can also be left as a final finish. If the surface you are painting doesn't have any major issues, maybe some hair line cracks here and there, then the Ceiling Pro will see to them. I hope this helps.
Answered by: Zinsser Product Support
Date published: 2019-11-04
  • y_2021, m_5, d_6, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_GB, sid_6298P, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 21ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Zinsser
Coating & Finishes Drying Time Touch-Dry in 30 Minutes
Colour White
Coverage Per Litre 10 m²/Ltr
Label Info 2: Hazard Statements H412 Harmful to aquatic life with long lasting effects.
Label Info 3: Precautionary Statements P103 Read label before use.P102 Keep out of reach of children.P101 If medical advice is needed, have product container or label at hand.P273 Avoid release to the environment.P501 Dispose of contents/container to …
Label Info 4: Supplementary Label Info Contains 4,5-dichloro-2-octyl-2H-isothiazol-3-one and 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction.
Liquid Base Water-Based
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Parent Colour White
Pieces in Pack/Case 1
Product Type Ceiling Pro 5-in-1 Paint
Range Name Ceiling Pro 5-in-1
Volume 2.5 Ltr

Downloads

Safety Data Sheet (COSHH)