WiFi Connekt Single-Band N300 13A 2-Gang Switched Socket with Ethernet + 2.0A USB Add-On Socket (3628V)

Features powerline technology and USB charging. Extends wired or wireless networks over the existing electrical wiring. Provides a full strength, uninterrupted Wi-Fi network throughout the home or office. Ethernet ports can connect any device that requires a cable connection such as desktop computer, games consoles and satellite boxes. To be used in conjunction with any other installed WiFi CONNEkT Socket.

  • Maximum Data Transfer Rate: 500Mbps
  • Wired & Wireless Connection
  • Pass-Through
  • Frequency Band: 2.4GHz
  • 2 x Ethernet Ports & 1 x USB Port
  • 1 Year Guarantee
  • 15m Wireless Range

More Info

View all: WiFi Connekt Switches & Sockets

£69.99INC VAT

Add to basket for...

WiFi Connekt Single-Band N300 13A 2-Gang Switched Socket with Ethernet + 2.0A USB Add-On Socket is rated 4.3 out of 5 by 7.
  • y_2018, m_7, d_17, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_GB, sid_3628V, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from No more signal trouble Bought 2 of these to go with the WiFi Connekt starter pack. Finally have good wifi coverage throughout the whole house
Date published: 2018-03-14
Rated 5 out of 5 by from Fantastic product! I have had poor WIFI signal strength in various rooms in my home so this sounded like the perfect solution... and it is! Simple to install. I purchased the starter kit plus an add on socket and they all synced in a flash. Handy to have the USB charging socket plus the network sockets. I prefer the fact that it is all built into the socket rather than having a bulky plug in adapter.
Date published: 2018-03-07
Rated 4 out of 5 by from Nice bit of kit I bought just an add-on socket by mistake too, but it can be flashed to a master (firmware is on GroupGear website). Works with an existing Powerline network but is fiddly to sync. (I ended up programming the Powerline key using a wired connection into one of the ethernet sockets and an app like the Devolo Cockpit powerline utility.). Now works very nicely.
Date published: 2018-02-10
Rated 1 out of 5 by from Bad piece of kit Visually the plug sits 3cm from the wall so somewhat protrudes, which is't practical or visually pleasing. The plastic is cheap and flimsy so be careful not to screw it in to tightly or the buttons will get stuck. The only way to reset the unit was by turning the mains off as the reset buttons did not work. You configure the devices by a admin portal. This doesn't render or refresh properly. Even the logo hasn't been blended into the portal, so looks basic and has limited functionality. Very temperamental units would sometimes work and then just stop. I had the TV plugged into one unit and the TV would restart. The install instructions are useless. Basically run an IPConfig and see what subnet mask you're on, then config the device manually as the automatic setup does not work. There is no support for this device over the weekend so you'll have to call in the week. This may not be convenient for people who work! In theory this is a good idea. However, the product needs to be fully tested before going out to market. Don't waste you're money and more importantly you're time.
Date published: 2018-01-12
  • y_2018, m_7, d_17, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_GB, sid_3628V, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

WiFi broadcast without WiFi router?

Are you able to broadcast WiFi from the plates without a WiFi router, so they become WiFi APs? Cheers
Asked by: Plantybass
Hi, Yes you can achieve this by configuring the units in ‘Wired Access Point Mode’ this will allow you to configure the units as WiFi enabled access points without wirelessly connecting to your router. https://www.youtube.com/watch?v=U9t1RyCqyPs Thanks
Answered by: WIFI CONNEkT
Date published: 2018-06-23

How many of these units can exist on the same network?

We want to offer an IP Relay retro-fit cabled home automation system, is there a limit to how many of these units can exist on a network. FYI, some plugtop PowerLine units state limits of anything from 8 to 64 units. Thanks :-)
Asked by: MDARLtd
Hi, The maximum amount of units on a network is 8 units. Meaning you can have 1 Starter Kit (which includes 2 units, 1 x Master and 1 x Add-on) along with this you can have up to 6 Additional Units. Thanks.
Answered by: WIFI CONNEkT
Date published: 2018-05-18

Does it come with a spacer plate for stardard socketet boxes??

Asked by: GavinB22
Hi, Yes, each unit you purchase comes with a 10mm Spacer. The units fit into a 35mm back box as standard Thanks.
Answered by: WIFI CONNEkT
Date published: 2018-03-11

Consumer unit

Elaborating on the question above about the house circuits for upstairs and down. My property has a three phase supply. Does this work across phases or only on outlets of the same phase?
Asked by: Djn1
Hi, Unfortunately the units do not work across phases. The units only connect to each other if they are situated on the same phase as each other. Thank you.
Answered by: WIFI CONNEkT
Date published: 2018-05-18

Does this use the HomePlug standard for powerline networking and if so which version?

Asked by: Dunelm
No the powerline standard is from its own Qualcomm chipset.
Answered by: Youngy857
Date published: 2018-01-25
  • y_2018, m_7, d_17, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_GB, sid_3628V, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand WiFi Connekt
Link Rate Class N300
Manufacturer Guarantee 1 Year Guarantee
Max. Link Rate (Mbps) 500 Mbps
Model No 27-3020/WIFI/1
Network Standards Auto MDI/X, IEEE 802.1p, IEEE 802.11 b, g, n, IEEE 802.3, u, x, IEEE 1901.
Pack Size 1
Pieces in Pack/Case 1
Product Depth 38 mm
Product Height 87 mm
Product Length 147 mm
Product Type 13A 2-Gang Switched Socket with Ethernet + 2.0A USB Add-On Socket
Radio Frequency Band 2.4GHz
Total Product Weight 0.32 kg