Thomas Dudley Ltd Side-Entry Fill Valve ½" (7058F)

£ 16.89INC VAT

Add to basket for...

Thomas Dudley Ltd Side-Entry Fill Valve ½" (7058F)

Hydroflo side-inlet valve with brass tail. Features 2 backflow prevention devices to stop water backflow into mains system. Supplied with quiet equilibrium float valve, silence tube for quiet refill of tank and key for simple and safe removal of the filter. Spare parts readily available.

  • Plastic Body & Brass Shank
  • Height: 100mm
  • Suitable for High & Low Pressure Systems
  • Fits Most Ceramic & Concealed Cisterns
  • Water Efficient
  • Professional Brass Tail
  • Quiet Equilibrium Float Valve
  • 3 Year Manufacturer's Guarantee
  • Manufactured in the UK
  • ½" Brass Tail Prevents Cross-Threading

More Info

View all: Thomas Dudley Ltd Fill & Flush Valves

Bulk Save Save up to 5%
Bulk savings
QTY Price per item Saving
1 - 2 £16.89 -
3 + £16.04 Save 5%
£16.89INC VAT

Add to basket for...

Add to saved list...

Save
Rated 1 out of 5 by from Contents not accurate Contents differ to specification and picture. No silencer tube: infact it is not possible to fit a silencer tube. No base on float! Brass shank would have had to be cut in order to fit. Had to take some parts of existing unit Product is fine but be careful if fitting as a replacement.
Date published: 2021-09-15
Rated 5 out of 5 by from Quality Valve A high quality serviceable fill valve from a trustworthy company. Simple to fit with the added security of a brass shank to stop cross threading in tight spaces.
Date published: 2021-07-24
Rated 1 out of 5 by from avoid at all costs The float is open at the bottom. If the tank empties the arm drops so far that on refilling the float fills with water and therefore does not float and the water fills continuously. Dudley have confirmed this to me and stated that the float must not be adjusted down enough to enable the float to fill up! in reality this means the only adjustment available is the 1st 1.5cm or so making the rest of the stem useless and sticking up so high that it will foul on the lid, again causing constant filling. The stem is also so weak that in the 1st scenario the inherent buoyancy of the plastic is enough to bend the float under the arm rather than lift and close the valve. As the useable adjustment was too little i have had to fix a polystyrene ball under the float.
Date published: 2021-07-22
Rated 1 out of 5 by from Just wont shut off the water. Installed and did not shut water off. Removed and checked assembly was correct. Tested by just blowing air into the fill entry point and lifting the float, still did not shut off. The only way I could get it to shut of was by pushing the arm up really hard and back toward the main body forcing the rubber against the pin hole. Just by lifting the float as water would do did not resist air pressure from my lungs. Useless.
Date published: 2021-07-18
  • y_2021, m_9, d_20, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_53
  • loc_en_GB, sid_7058F, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 18ms
  • REVIEWS, PRODUCT

Compatible with concealed cistern?

I ask because concealed cistern is quite small, looks like the float on this valve might clash with the siphon as they’re not very far apart
Asked by: ThreeDog

Is this suitable for use in a loft header tank?

Asked by: 117501

Is this compatible with the Vantage cistern?

Asked by: SpannerMick

Does this item come with the plastic sleeve that reduces noise as it fills?

Asked by: abbo27
No. At least not that I can find in the item I received.
Answered by: Morkvarg
Date published: 2021-07-14

How do Dudley filling valves cope with high and low water pressure?

NO apparent flow restrictors?! And if can cater for pressures greater than 4 bar how can they also cater for low pressure?
Asked by: michcosg
Our Hydroflo range of inlet valves will operate at pressures as Low as 0.1 bar, ( 1m head of water. ) However, due to the low water pressure, fill times will not be quick.
Answered by: Dudley Sales TDL
Date published: 2021-08-25
  • y_2021, m_9, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_GB, sid_7058F, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 11ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Body Material Plastic Body
Brand Thomas Dudley Ltd
Compatibility Fits Most Ceramic & Concealed Cisterns
Manufacturer Guarantee 3 Year Manufacturer's Guarantee (T&Cs Apply)
Pack Size 1
Pieces in Pack/Case 1
Pressure Suitability Suitable for High & Low Pressure Systems
Product Depth 50 mm
Product Height 100 mm
Product Type Fill Valve
Product Width 205 mm
Thread Size ½ "
Toilet Fitting Type Fill & Flush Valves

Product contents

Compact body, float arm and float, silence tube, filter key and 2 x built-in backflow prevention devices.