Save Time, Please use Click & Collect

Strom SEIH18K3PTS1 Touchscreen Instantaneous Water… (1100P)

£ 299.99INC VAT

Add to basket for...

Not available to Click & Collect

Store Collection Unavailable

Not available for delivery

Strom SEIH18K3PTS1 Touchscreen Instantaneous Water Heater 18kW (1100P)

For Technical advice please call 0333 344 2474. This product requires a 3 phase electrical supply and will be unsuitable for most domestic installations. Please consult with Strom for guidance on flowrates as this will vary by application.

3-phase commercial water heater provides on-demand instantaneous hot water with good flow rates at multiple outlets across a commercial site. Glossy IMD splashproof cover. Utilises an enclosed loop heating system, with a multi-layer heating chamber reducing limescale build-up. Directly set and maintain output temperature automatically, using the large widescreen LED display with touch controls. Displays output temperature and target temperature. Provides information on power and water consumption and has an automatic fault detection with on-screen feedback.

  • Suitable for Commercial Use
  • Wall-Mounted
  • Manual Temperature Control
  • ABS Body
  • Mains-Powered
  • Overheat Protection
  • Energy Rating: A
  • 1 Year Guarantee

More Info

View all: Strom Water Heaters

£299.99INC VAT

Add to basket for...

Not available for delivery
Not available to Click & Collect

Store Collection Unavailable

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 13ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Add to saved list...

Save
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 102ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

What is the breaker current required for the 18kw and the 21 kw 3 phase models?

Asked by: CeeDeeH

Use for shower and bath and kitchen taps

Can this be used to heat water from the mains into the heater then onto the bath and shower or to kitchen sink? How strong is the flow ? Can a pump be fitted following exit from heater?
Asked by: Anonymous
Hi. Thank you for taking interest in our product. The Strom 18kw instantaneous water heater can be used to heat water from the mains and can be used across multiple outlets. However this unit is for commercial use only as it requires 3 phase electric which is not available in most UK households. The flow rate would need to be set approximately 8 litres a minute at 40 degrees Celsius. A pump could be fitted but you would need to ensure this does not increase the flow rate beyond recommended rate.
Answered by: Strom Limited Genius
Date published: 2019-04-03

STORM 18KW ELECTRIC WATER HEATER

Would it be strong inuf for a bathtub?
Asked by: Storm1
Hi. Thank you for taking an interest in our product. The Strom 18kw water heater would be strong enough to fill a bathtub, however this product requires 3 phase electric which is not available in most UK households and is only normally found in commercial places.
Answered by: Strom Limited Genius
Date published: 2017-08-12
  • y_2020, m_8, d_11, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_1100P, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 97ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Advisory Notice This device will deliver approximately 8.5Ltr/min at an increase of 30°C to the incoming mains cold temperature. Flow rates higher than this will achieve a lower output temperature.
Body Material ABS Body
Brand Strom
Connection Type G ½"
Display Type LCD Display
Energy Rating A
Fixings Supplied Fixings Supplied
IP Rating IP25
Manufacturer Guarantee 1 Year Guarantee
Max. Flow Rate 12 Ltr/min
Maximum Bar Pressure 6.0 bar
Min. Flow Rate 2 Ltr/min
Minimum Bar Pressure 0.2 bar
Model Name/No SEIH18K3PTS1
Mount Type Wall-Mounted
Overheat Protection Overheat Protection
Pack Size 1
Pieces in Pack/Case 1
Power Output (Watts/Kw) 18 kW
Power Type Mains-Powered
Power Voltage Supply 400 V
Product Depth 86 mm
Product Height 385 mm
Product Type Touchscreen Instantaneous Water Heater
Product Width 260 mm
Suitable System Suitable for Commercial Use
Temperature Control Type Manual Temperature Control
Temperature Range 30-55 °C
Thermal Cut Out Temperature 90 °C
Total Product Weight 6.1 kg
Water Entry Points Bottom Only
Water Heater Application Universal Water Heaters
Water Heater Location Oversink

Product contents

Water heater and mounting bracket kit.

*Delivered direct from our suppliers in the number of working days stated on the delivery button