Strom Power Digital Instant Water Heater 5.5kW (3074P)

£ 108.99INC VAT

Add to basket for...

Delivered by our approved supplier, find out more

Delivered by our approved supplier, find out more

Strom Power Digital Instant Water Heater 5.5kW (3074P)

For Technical advise please call 0333 344 2474. This product requires a 24 AMP supply it is not suitable for a normal plug. Maximum flow rate 2.8 ltrs per min recommended. Unfortunately this product cannot be delivered offshore. Order by 20th Dec for pre Christmas delivery. No deliveries are made between 23rd Dec & 3rd Jan.

Compact design is a perfect compliment to a wash room or utility room. Multi-layer heating chamber reduces limescale build-up. Digital read-out provides live feedback for target temperatures and actual temperatures. Digitally selected temperatures ensure water is not being heated more than is required and helps to prevent scalding. Easy to operate with last setting memory.

  • Suitable for Most Domestic Systems
  • Wall-Mounted
  • Manual Temperature Control
  • ABS Body
  • Mains-Powered
  • Overheat Protection
  • 1 Year Guarantee
  • Enclosed-Loop Heating System
  • Splashproof Casing
Energy Rating A

More Info

View all: Strom Water Heaters

£108.99INC VAT

Add to basket for...

Delivered by our approved supplier, find out more

Add to saved list...

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

Can this unit be installed below sink ie in a vanity cupboard

Asked by: elf2
Absolutely, so long as an adequate electrical and water connection can be made.
Answered by: Strom Limited Genius
Date published: 2021-11-10

hi, does this product need any accessories? e.g. expansion vessel or pressure valves?

Asked by: neil12345
Thank you for your enquiry and interest in our product. This product does not require any expansion vessels or expansion relief valves. The heating element within the unit will only come one once the flow sensor detects a flow. Flow will only pass through a unit when a tap is open meaning there would be no unvented expansion. The only pressure valve you may require would be a pressure reducing valve before the unit should the the pressure in your system be above 6 bar as the maximum working pressure of this unit is 6 bar. Kind regards.
Answered by: Strom Limited Genius
Date published: 2017-05-27

What connection does this have

What connection lead is this i have a isolated switch run close to were it needs to go does it come with a cable that can just be connected to that? and if so how long is the lead?
Asked by: steveyboy45y
Hi, thanks for the question. Unfortunately an electrician would need to decide if the supply was adequate for the unit, however I can advise that the unit comes with around 1.5m of cable.
Answered by: Strom Limited Genius
Date published: 2017-03-25

Does this need to be hard wired or can it plug into a 13amp socket?

Asked by: LesJos
Hi, thanks for the question. Unfortunately this is electrical installer only product. A 5.5kW water heater will require approximately 22 Amps, so this would far exceed a 13Amp plug top and would pose a serious hazard.
Answered by: Strom Limited Genius
Date published: 2022-05-29
  • y_2022, m_12, d_4, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_GB, sid_3074P, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 93ms
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Advisory Notice This device will deliver approximately 2.8Ltr/min at an increase of 30°C to the incoming mains cold temperature. Flow rates higher than this will achieve a lower output temperature.
Body Material ABS Body
Brand Strom
Connection Type G 1/2" Connection
Energy Rating A
Fixings Supplied Fixings Supplied
IP Rating IP25
Manufacturer Guarantee 1 Year Guarantee
Max. Flow Rate 8 Ltr/min
Maximum Bar Pressure 6.0 bar
Min. Flow Rate 0.6 Ltr/min
Minimum Bar Pressure 0.2 bar
Model Name/No Power
Mount Type Wall-Mounted
Overheat Protection Overheat Protection
Pack Size 1
Pieces in Pack/Case 1
Power Output (Watts/Kw) 5.5 kW
Power Type Mains-Powered
Power Voltage Supply 220-240 V
Product Depth 70 mm
Product Height 290 mm
Product Type Digital Instant Water Heater
Product Width 210 mm
Suitable System Suitable for Most Domestic Systems
Temperature Control Type Manual Temperature Control
Temperature Range 30-55 °C
Thermal Cut Out Temperature 90 °C
Total Product Weight 5.75 kg
Water Entry Points Bottom Only
Water Heater Application Universal
Water Heater Location Oversink
Water Heater Product Type Electric Water Heaters

Product contents

Water heater and mounting bracket kit.


Instruction Manual

Delivered direct from our suppliers in the number of working days stated on the delivery button

Direct from our supplier delivery restrictions

Geographic restrictions apply, check your postcode below to see if any apply to you. For some locations delivery may take longer than the specified delivery time, and we can not currently offer delivery to offshore addresses.

Please ensure we have your mobile phone number when you order so we can keep you updated with deliveries.


Please note - If you wish to return this item you will need to call us on our freephone number 03330 112 112 to arrange a free collection.


Were we able to answer your question? If not, please Contact Us.