Spit Driva TP12 Panhead Fixings Metal 35mm 100 Pack (11923)

£ 12.99INC VAT

Add to basket for...

Spit Driva TP12 Panhead Fixings Metal 35mm 100 Pack (11923)

The easiest way to fix to plasterboard and stronger than the plasterboard itself. Supplied with screws.

  • High Strength Zamak 3 Body
  • Positive Tightening of the Anchor
  • No Need for Pre-Drilling
  • Head Sits Flush Behind Fixture
  • Corrosion-Resistant

More Info

View all: Spit Self Drills

£12.99INC VAT

Add to basket for...

Add to saved list...

Save
Rated 5 out of 5 by from Plaster Fitting Does what it made to do, excellent value. These fixings screw into plaster easily and secure what ever I secure it’s successful.
Date published: 2021-04-29
Rated 5 out of 5 by from plaster board fixings brilliant product and worth the money highly reccomend
Date published: 2021-03-12
Rated 5 out of 5 by from Excellent Product Have been using these for 40 years. The best, in my opinion. I always pre drill 6.5mm as I find it makes a better job and allows fitting to softer boards without damaging and stops insert coming out with screw if you need to remove the screw.
Date published: 2021-02-10
Rated 5 out of 5 by from Done the job Needed these to put our curtains which were hanging off our wall due to plaster board walls in our home. Ordered and ready within 30minutes. Perfect for the job, really felt like they are biting into the plaster board to give a good secure hold. Can’t answer longevity wise as only just used them, but so far so good
Date published: 2021-01-11
  • y_2021, m_7, d_27, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_66
  • loc_en_GB, sid_11923, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 140ms
  • REVIEWS, PRODUCT

What’s the maximum weight that these can hold?

Asked by: Bigshow77

What is the diameter of the head?

Might it be suitable for mounting a power extension strip to the wall?
Asked by: thewinelake
Hi thewinelake, thank you for your question. The Driva TP12 is a self drilling plasterboard fixings. The TP12 is capable of a maximum fixing thickness of 12mm and is supplied with a panhead screw. The diameter of the screw head is 10mm. Please note the minimum thickness of the plasterboard must be 10mm. As with all fixings, please ensure that the fixing and base material are suitable for the application. Kind regards ITW
Answered by: ITW Spit
Date published: 2020-07-14

Does the screw go all the way in?

Bought a different make and the screw tightened up with a good 2cm of thread still showing. Do these screws go all the way in? Will be hanging a bathroom mirror and need to to be fairly flush to the wall.
Asked by: Anonymous
Hi GregFNewton, thank you for your question. The length of the anchor is 31mm and the length of the screw, from the underside of the head, is 35mm. This will therefore leave a minimum gap of 4mm. Also, the head style is a pan head. Please note the maximum fixture thickness is 12mm and the minimum thickness of the base material is 10mm. As with all fixings please ensure the base material and fixings are suitable for the application. Kind regards ITW
Answered by: ITW Spit
Date published: 2020-01-29

Can the screw be shortened to allow fixing of very thin metal plate(1.5mm thick)

Asked by: Leaton
Hi Leaton, thank you for your question. The screw supplied can not be shortened.The minimum screw diameter for use in the Driva TP12 is 4.5mm. The minimum thickness of the base material is 10mm and the maximum fixture thickness is 12mm. As with all fixings please ensure the base material and fixings are suitable for the application. Kind regards ITW.
Answered by: ITW Spit
Date published: 2018-01-14

What is the diameter of the screw supplied. Is the thread already cut inside the plug or does it rely on a screw with self-tapping?

Asked by: Leaton
Hi Leaton, thank you for your question. The diameter of the screw supplied with the Driva TP12 is 4.5mm, the screw is not self-tapping. As with all fixings please ensure the base material and fixings are suitable for the application. Kind regards ITW.
Answered by: ITW Spit
Date published: 2020-10-23
  • y_2021, m_7, d_27, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_GB, sid_11923, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 107ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Spit
Construction Material (Fixings) Metal
Manufacturer Guarantee 1 Year Guarantee
Pack Size 100
Pieces in Pack/Case 100
Product Length 35 mm
Product Type Driva TP12 Panhead Fixings