Side-Entry Fill Valve ½" (64191)

£ 6.75INC VAT

Add to basket for...

Side-Entry Fill Valve ½" (64191)

Quiet Part 4 equilibrium side-inlet fill valve. For toilet cistern or storage tank.

  • Plastic Body & Plastic Shank
  • Height: 110mm
  • Suitable for High & Low Pressure Systems
  • For use with Side Entry Cisterns ½"
  • Quick & Quiet Refill

More Info

View all: Essentials Fill & Flush Valves

Bulk Save Save up to 5%
Bulk savings
QTY Price per item Saving
1 - 2 £6.75 -
3 + £6.41 Save 5%
£6.75INC VAT

Add to basket for...

Add to saved list...

Save
Rated 1 out of 5 by from Wrong item in bag This is not the product that is supplied in the bag.it is not the quiet fill one as it does not have the plastic sleeve to allow the water to fill the tank from the bottom. It is a supplier fault as I went to another retailer and found the wrong product in the bag there also. Staff at branch were unhelpfully in assisting me to find an alternative
Date published: 2021-08-10
Rated 3 out of 5 by from Does the job It does what it's supposed to do, but only problem I have is you don't get the plastic that goes on the top for the water filler, I had two and it wasn't in any of them.
Date published: 2021-06-12
Rated 5 out of 5 by from Side entry toilet valve Price cheap. Solid plastic valve very easy to install, it took all of 5 minutes and works exactly as required only time will tell how reliable it will be but as of fitting it is just what I needed.
Date published: 2021-05-22
Rated 5 out of 5 by from Cheap and does its job Easy to fit. Works fine. Good price. Why wouldn't you buy it?
Date published: 2021-05-04
  • y_2021, m_10, d_14, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_114
  • loc_en_GB, sid_64191, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms
  • REVIEWS, PRODUCT

Would it work for supply pressure below 0.1 bar

I had Grohe inlet valve which worked fine with low pressure of 2+ feet for years, would this work as replacement. If not any alternative, please.
Asked by: Purush
Hello Purush, Yes, this can be used on low pressure systems. Thank you for using Q&A
Answered by: SWake
Date published: 2021-06-17

Where is the filling tube?

This product is showing it should include the filling tube, the tube is shown on the picture on the website and also in the instruction manual but not included in the item pack?
Asked by: megmog
Hello megmog, Due to a change in regulations the tube, which acted like a silencer and stopped the water splashing, had to be removed. Thank you for using Q&A
Answered by: Cwalm
Date published: 2021-08-28

Water still won't shut off when it's full, new part fitted

Asked by: 1elephant
Same issue. I found the tiny pin on the diaphragm is broken. Very poor quality valve
Answered by: HTech
Date published: 2021-06-08

Thomas Dudley Vantage

Have a TD Vantage concealed cistern with side-entry Hyroflo. Float level arm isn't cutting off inlet valve and think the diaphragm is faulty. Would this fit the TD Vantage? Thanks.
Asked by: KSBird
Hello there, If the fittings match then this should work, however. We would advise going to a suitable tradesperson or going directly to the supplier to confirm this. Thank you for using Q&A TC
Answered by: TChanning
Date published: 2019-01-12

Adjusting the float height

How is the float height adjusted please? I can see the notches on the rod connected to the float but can not move them through the connector on the float arm. Not helped by being a concealed cistern so difficult to see!
Asked by: Moiaussi
Hello Moiaussi, It would be best to contact as qualified tradesperson to assist you with the installation of this item Thank you for using Q&A SW
Answered by: SWake
Date published: 2021-10-12
  • y_2021, m_10, d_14, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_GB, sid_64191, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Body Material Plastic Body
Brand Essentials
Compatibility For use with Side Entry Cisterns ½"
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Pressure Suitability Suitable for High & Low Pressure Systems
Product Depth 120 mm
Product Height 110 mm
Product Type Fill Valve
Product Width 80 mm
Thread Size ½ "
Toilet Fitting Type Fill & Flush Valves

Product contents

Part 4 side inlet fill valve and fittings.