Save Time, Please use Click & Collect

Scheppach TS 310 315mm Electric Table Saw 230V (4446J)

£ 369.99INC VAT

Add to basket for...

Not available to Click & Collect

Store Collection Unavailable

Scheppach TS 310 315mm Electric Table Saw 230V (4446J)

Unfortunately this product cannot be delivered Offshore.

Robust steel constructed table saw for the tradesman wanting a portable table saw. With a powerful 3hp induction motor capable of performing straight, bevel and mitre cuts. Supplied with a sliding table carriage, side and rear extension tables and 2 x long life TCT saw blades. With rigid rip fence for accurate straight line cutting, lifting handles and transport wheels. Suitable for all types of timber, narrow boards and other wood-like materials.

  • 2.2kW Induction Motor
  • Max. Cut Depth: 83mm
  • 24-Tooth TCT Blade
  • Steel Table
  • Parallel & Mitre Fences
  • Dust Extraction Facility
  • Brake
  • Table Extensions

More Info

View all: Scheppach Table Saws

£369.99INC VAT

Add to basket for...

Not available to Click & Collect

Store Collection Unavailable

Scheppach TS 310 315mm Electric Table Saw 230V is rated 4.3 out of 5 by 7.
  • y_2020, m_8, d_10, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_GB, sid_4446J, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 23ms
  • REVIEWS, PRODUCT

Add to saved list...

Save
Rated 4 out of 5 by from Excellent site saw This is a portable site saw so don't don't expect the exact precision and control of a cast iron table saw at 4X the cost. Having said that, if you are patient when putting it together and setting it up then it is very good at what it does. The set up is crucial. When supplied my blade was not parallel to the fence and the riving knife was out of line with the blade. The former is easy to sort out using the oval screw holes to slightly adjust the blade direction. The latter was a bit more tricky and needed a shim to get it spot on. Worth doing though to get the saw to cut spot on. It seems very powerful and the induction motor is quiet with a good soft start. The fence is brilliant - steel and aluminium with a quick and adjustable locking mechanism. A well adjusted saw and sharp blade should require little sideways pressure against the fence anyway but this one is very rigid. The saw table is stable and rigid and wheels around easily. The extension tables and supports work well but the supports are a bit flimsy. Wouldn't take a lot to bend them. The rise and fall mechanism is ok but it's best to offer a little help on the way up by lifting the motor whilst turning the handle. Makes it much easier. Probably the weakest design point is the tilt mechanism which relies on two lock nut handles, one on each end of the motor housing. Bit of a fiddle if you do a lot of this type of cut. All in all, it's not bad at all.
Date published: 2019-03-22
Rated 5 out of 5 by from best value all round saw this saw will do most jobs required in small workshop,have not found any faults,you got to take your time and set out all parts before building ,really does not take a lot of time ,great quality saw ,for this sort of price range two very usefull blades,power wise its very good nothing at all i tried cutting was a problem i would highly recomend this piece of kit
Date published: 2018-10-14
Rated 3 out of 5 by from Not quite good enough I've had this saw for a month now and am in the process of asking for a refund. I have found a few minor issues that have had major affects on the quality of this saws output. Notability the table extensions and sliding table keep sinking because they are held up by bolts that fit into elongated holes, they regularly sink by as much as 5mm in just an afternoons work. This leaves large items bending to the profile of the sunken table as they're being cut. The longitudinal stop is off by about 4degrees from the line of the saw blade meaning no cut can be trusted to be square off the bat and for a commercial workman this is not acceptable.
Date published: 2018-07-15
Rated 5 out of 5 by from Good solid quality I've had the TS310 for 10 months and it is a great piece of kit. Once put together (a couple of hours) it sits true and doesn't budge in use. I have it in my limited-space single garage workshop and the wheels allow me to move it in and out from a wall when I need to use it. When not in use, a 20mm ply sheet on top gives me an extra work surface. Supplied with two tungsten carbide tipped blades (24T and 48T), the quiet 3HP motor effortlessly rips and cuts any hard and soft wood tasks I've thrown at it. The sliding table carriage is a hefty all metal construction running on four bearings. Once set, it stays true over many repeat cuts. If connected properly to a vacuum, the dust extraction is good - with just a little blowback from the blade and a little under the motor. I reckon over 90% ends up in the vacuum. One small hint: If you run this from a 13amp fused unit (as I did) and turn it on while a 2kw heater is on, it will blow the fuse! Solution: buy an RCD Garage unit - product no. 1926G. Lastly, the only minor negative point I have is that the blade guard is black and it would be better being transparent.
Date published: 2017-08-20
  • y_2020, m_8, d_10, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_GB, sid_4446J, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 26ms
  • REVIEWS, PRODUCT

Cut depth

Is the depth of cut adjustable?
Asked by: bentinck
Hello Yes from _ zero to 82 mm
Answered by: Scheppach-Expert
Date published: 2020-08-08

can I cut aluminium half inch square section on this saw if I have the correct blade ?

Asked by: basketball
Hello The cutting of thick aluminium on this saw bench is not recommended toy could use use a bandsaw like the Basa 3 with lower speed 370mtr min with a bi metal blade .
Answered by: Scheppach-Expert
Date published: 2020-07-17

Soft Start

Does this have a soft start as is advertised on the HS120?
Asked by: Fletcherdog

fence

HI how long is the fence for this saw? how long is the Ruled fence rail
Asked by: alexjeffery
Hello The cross cutting fence rail for the sliding table is not ruled , there are no scales on this model , it is 730mm long and has a sliding end stop . The rip fence is 580mm long .
Answered by: Scheppach-Expert
Date published: 2019-09-19

Does it have a soft start?

Asked by: porkers41
Hello The ts310 has a 3 hp induction motor that has a soft gradual start up unlike the brush type motors .
Answered by: Scheppach-Expert
Date published: 2019-06-22
  • y_2020, m_8, d_10, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_GB, sid_4446J, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 23ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Blade Description TCT Blade
Blade Diameter 315 mm
Brand Scheppach
Brushless Brushed
Corded Tool Weight 57 kg
Cutting Depth Capacity 83 mm
Disc Bore Size 30 mm
Manual or Powered Powered
Manufacturer Guarantee 2 Year Manufacturer's Guarantee (T&Cs Apply)
Max. Bevel Angles (L/R) 45° - 0°
Max. Cutting Depth At 90deg 83 mm
Model No TS 310
No Load Speed 2800 rpm
Number of Teeth 24
Pack Size 1
Pieces in Pack/Case 1
Plug Included Includes Plug.
Power Output (Watts/Kw) 2.2 kW
Power Supply Electric
Power Voltage Supply 230 V
Product Height 1050 mm
Product Length 1110 mm
Product Type Table Saw
Product Width 600 mm
Supplier Manufacturer Helpline 01484 400488
Table Length 1600 mm
Table Width 550 mm
Total Product Weight 57 kg

Product contents

TS310, 2 x TCT saw blades, rip fence, sliding table carriage, 2 x extension support tables, extraction hose, blade guard, wheels and instruction book.

*Delivered direct from our suppliers in the number of working days stated on the delivery button