Scheppach HBS250 120mm Electric Bandsaw 240V (893FG)

£ 249.98INC VAT

Add to basket for...

Not available to Click & Collect

Store Collection Unavailable

Not available for delivery

Scheppach HBS250 120mm Electric Bandsaw 240V (893FG)

Unfortunately this product cannot be delivered offshore.

Features a powerful induction motor, cast alloy table with extending table support for wider cuts and a sturdy rip fence for accurate straight cutting. Also comes with a leg stand and mitre guide for cutting angles. Ideal mid-sized bandsaw for DIY.

  • 420W Induction Motor
  • Table W x D: 380 x 300mm
  • Max. Cut Depth: 120mm
  • Throat Depth: 245mm
  • Cast Alloy Table
  • Rip Fence & Mitre Guide
  • Rack & Pinion Table Tilt
  • Tilt Range: 0-45°

More Info

View all: Scheppach Bandsaws

£249.98INC VAT

Add to basket for...

Not available for delivery
Not available to Click & Collect

Store Collection Unavailable

Add to saved list...

Rated 4 out of 5 by from Good value for money Looked around for a while for a saw with more than 100mm clearance, HBS261 was out of stock, Record BS250 is nowhere to be found at the moment (and more expensive) so went with this one. Assembly, which I have seen described as hard, was easy and quick (But then I do work on large, complex stuff most days). Adjustment (this is my first bandsaw) feels a bit iffy, but I think that's me and getting my hands in for adjustment under the table. Sawing soft and hard wood worked out of the box and without any problems, getting it square didn't take long. Got this mostly for resawing, which works a treat. Very happy so far, no idea about longevity, thus the 3 stars average.
Date published: 2021-02-04
Rated 1 out of 5 by from I regret purchasing this I wish I hadn’t bought this and instead looked for a more reliable option. The saw blade pulls to the right in cutting, so much so that no straight line can ever be achieved. I have more success with a jigsaw. The motor may be adequate but the saw still stalls in woods such as 2” thick ash. The odd saw blade length makes it hard to easily find replacements
Date published: 2020-08-14
Rated 1 out of 5 by from Scheppach HBS250 - very very p I've had this for about 6 months and primarily bought it to thin out wood for some home projects allowing me to joint and glue-up.Despite several attempts I cant get this to saw straight, it stalls on resawing simple 3 inch thick pine boards, even small hand cuts and blades are difficult to find. I was excited to get this, had hopes for some great DIY projects in my spare time and has turned out to be the biggest waste of money I've As a tradesman I expected alot more and it's not cheap. Sorry but I wouldn't waste my money on this product which has been disappointing thing in every way.
Date published: 2019-08-26
Rated 5 out of 5 by from As good as you need I will start with the negatives, 1)while the table extention is metal that sticks to a magnet, the rest of the table isn't, shame really. 2) The fence could have done with a T slot to using feather board 3)The table sits just low enough to clip the stop screw on the extention against the lower door. 4)When I phoned through my order I was told the saw came with 2 extra blades, which it doesn't. 5) The blade supplied cut through soft and hard wood but let me know straight off it was struggling. The Positives 1) although it shows the saw as having a multi fitting lower dust port, it also has an upper port which works fine 2) I have read nightmare reports that the set up is long and difficult and the instructions vague, I had this set up and working in under 30 mins, following the "Just enough" instruction book (no I have never worked for NASA. 3) fine tuning the saw was easy and simple as was checking and aligning the level of the table....Spoiler alert...The rubber foot under the table raises and lowers. 4) Having struggled for years with a 3.5" clearance saw, this at just under 5" is a treat, I look forward to working on bigger pieces . 5) I spent days comparing Scheppach, Draper, Lumberjack, Record and even axminster, the axminster never seemed available, the record and lumberjack offered bigger depth, more features but ran on 1/3 hp (300w) motors( compared to the scheppack 450W), and the draper did not have the power/clearance/ features, but cost more. This saw was cheaper than or equivalent to record, Axminster and Lumberjack and the deliver time was far quicker The stand is still wrapped in case I ever get the space to stand mount the saw but it works just fine on the bench. not over heavy, I am sure if I went at it like a demented bull I could easily bend the doors but otherwise this is a good quality None far east made machine and although I have only sparcely used it have no fears about the quality of the life, though to be safe I am running it on th slower setting until the motor is run in. I have marked it down for the value and features, Features because, well its a bandsaw and the extra blades I had to buy straight off that I was told came with it miffed me slightly, and the same reason for the Value also I would have loved a t slot in the fence and a magnetic full table and then I might just have forgiven the missing blades and gone straight to a full house.
Date published: 2019-05-02
  • y_2021, m_6, d_23, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_GB, sid_893FG, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 150ms

Is this a two speed machine?

Asked by: Yorky89
Hi, This machine has two speeds. You can change the speeds by moving the the belt on the bottom wheel pulley.
Answered by: Scheppach-Expert
Date published: 2021-05-24

Do Screwfix sell replacement blades for this product?

Asked by: Yorky89
Hi, Please contact screwfix customer services who can advise or put you in touch with the supplier.
Answered by: Scheppach-Expert
Date published: 2021-05-24

What is the overall height of this saw when mounted to the stand please?

Asked by: mrgrotey
Hi The overall height is 1485mm on the stand .
Answered by: Scheppach-Expert
Date published: 2020-10-30

What blade do I need for this product?

I have the SCHEPPACH HBS250 120MM ELECTRIC BANDSAW 240V and need new blades. One for cutting large pieces and one for cutting curves. I need to know exactly which blades I should buy for these purposes. The actual link to the blade would be useful. Thanks
Asked by: JenWad
Hello The blade required for ripping is 12mm x 4tpi x 1790mm for curved work the blade required is 6mm x 6tpi x 1790 sorry there is currently no scu code for these blades .
Answered by: Scheppach-Expert
Date published: 2020-07-27


How many TPI has the free blade that comes with the band saw ?
Asked by: Roysta1
Answered by: Scheppach-Expert
Date published: 2020-07-14
  • y_2021, m_6, d_23, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_GB, sid_893FG, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 166ms
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Blade Length 1790 mm
Brand Scheppach
Corded Tool Weight 28 kg
Cutting Depth Capacity 120 mm
Footprint Depth 485 mm
Footprint Width 630 mm
Manufacturer Guarantee 2 Year Manufacturer's Guarantee (T&Cs Apply)
Max. Cutting Depth At 90deg 120 mm
Model No HBS250
Pack Size 1
Pieces in Pack/Case 1
Plug Included Includes Plug.
Power Output (Watts/Kw) 420 W
Power Supply Electric
Power Voltage Supply 240 V
Product Depth 340 mm
Product Height 880 mm
Product Type Bandsaw
Product Width 440 mm
Table Depth 300 mm
Table Tilt Range 0-45 °
Table Width 380 mm
Throat Depth 245 mm
Total Product Weight 35 kg

Product contents

Bandsaw, table, rip fence, mitre guide, leg stand, 9mm blade, screwdriver and hex key.

*Delivered direct from our suppliers in the number of working days stated on the delivery button