Rated 5 out of
5
by
DGibbo from
Pillar drill
Really good piece of kit quiet motor pleased with the quality and ease of assembly very sturdy don't think I could have brought better.
Date published: 2019-12-21
Rated 5 out of
5
by
KeenWoodworker from
Delighted
Only had a very short while and obviously time will tell. Very solid and good bulid quality. Most competative price around - far cheaper than the same model elsewhere. Ordered through Ripon branch where I received outstanding customer service by an assistant who resolved an issue with an unrelated item at the same time. Swift home delivery.
Date published: 2019-10-26
Rated 5 out of
5
by
mcgrath from
It is very good drill press
It is very good delivery and it arrived in 1 day and you do need one
Date published: 2019-02-21
Rated 3 out of
5
by
Charlie2013 from
Robust, but some faults
The drill seems well made and robust.
However initially the drill would not run, since the drive belt was too tight. The adjustment would allow hardly any slackening and after loosening it ran but with a lot of vibration. Hopefully this will get better as the drill is used and the belt stretches.
The chuck is a push fit onto a tapered spindle. This proved difficult to fit, refusing to stay in place. After multiple cleaning attempts it did finally take using a slight screwing motion and a little help from a rawhide mallet.
The plastic chuck guard is relatively flimsy and one of the eyes holding the returning spring broke at the first attempt to use it.
Initially the spindle had too much play, causing slanted holes to be made. There is an adjustment for this and it now runs correctly, but only after all the available adjustment had been used.
In spite of this I still feel it is still good value, well made and robust, just let down by poor assembly/final adjustment.
Date published: 2014-11-25
Is the motor continuously rated?
Scheppach DP13 pedestal drill....see question above.
I purchased the ENB672DBT It’s only been used once, its only rated at 15min, not adequate for my use, I am only drilling wood, can I return it and exchange for a heavier duty model?
Asked by: Clankie45
Hello You will find that the majority of benchtop drills produced by various manufacturers have the same duty cycle , you can return it new and unused or faulty within 30 days for credit .
Answered by: Scheppach-Expert
Date published: 2020-06-03
Will this drill 13 mm solid bar comfortably
Asked by: Andyspen
Hello This model is ok for occasional drilling of thin metal the dp16vl has 500w of power where as the DP 13 is just 350w which does not drill steel as comfortably .
Answered by: Scheppach-Expert
Date published: 2020-05-20
can a motising attachment be fitted
Asked by: henry1944
HI sorry It is not possible to use / fit a mortising attachment on this model , Scheppach do not produce this attachment for their Drill presses .
Answered by: Scheppach-Expert
Date published: 2020-05-04
can head turn on the pillar or pillar turn on the base to drill deeper items than will fit between drill and base?
Asked by: tfg90
Hi The head can be turned on the pillar and locked with the grub screw .
Answered by: Scheppach-Expert
Date published: 2020-06-27
Vice
Can you advise which of your vices will fit this model please? I already have a vice but the fixing holes are in completely the wrong place so I need one which will fit. Thank you
Asked by: bassmanbazz
Hello Sorry Scheppach do not produce a vice with matching hole fixings for this model .
Answered by: Scheppach-Expert
Date published: 2020-06-26
| Specification |
| Brand |
Scheppach |
| Brushless |
Brushless |
| Chuck Capacity |
13mm |
| Chuck To Base Distance |
215 mm |
| Chuck To Table Distance |
138 mm |
| Chuck Type |
Keyless Chuck |
| Corded Tool Weight |
14.5 kg |
| Manufacturer Guarantee |
2 Year Manufacturer's Guarantee (T&Cs Apply) |
| Model No |
DP13 |
| No Load Speed |
600-2600 rpm |
| Overload Protection |
Thermal Overload Protection |
| Pack Size |
1 |
| Pieces in Pack/Case |
1 |
| Plug Included |
Includes Plug. |
| Power Output (Watts/Kw) |
350 W |
| Power Supply |
Electric |
| Power Voltage Supply |
230 V |
| Product Depth |
230 mm |
| Product Height |
415 mm |
| Product Type |
Bench Pillar Drill |
| Product Width |
230 mm |
| Spindle Travel |
40 mm |
| Table Depth |
165 mm |
| Table Tilt Range |
0-45 ° |
| Table Width |
165 mm |
| Throat Depth |
100 mm |
| Total Product Weight |
15.5 kg |
Product contents
DP13, keyless chuck and chuck guard.
*Delivered direct from our suppliers in the number of working days stated on the delivery button
