Pegler PEG402 TMV 15mm (96288)

£ 60.34INC VAT

Add to basket for...

Pegler PEG402 TMV 15mm (96288)

Chrome-plated DZR brass construction. Suitable for water. NHS DO8 model engineering specification.

  • Pre-Set at 43°C
  • TMV2 & TMV3 Scheme Approved
  • Anti-Scald TMV
  • Laser Etched Bar Code
  • Protective Caps on Valve Ports
  • Built-In Filters
  • Manufactured in the UK

More Info

View all: Pegler Thermostatic Mixing Valves

Bulk Save Save up to 10%
Bulk savings
QTY Price per item Saving
1 - 2 £60.34 -
3 - 5 £57.32 Save 5%
6 + £54.30 Save 10%
£60.34INC VAT

Add to basket for...

Add to saved list...

Save
Rated 5 out of 5 by from Ideal for job Needed one in a hurry. (Care home). ordered online picked up straight away, Box came with all I needed, swapped and water back on in 30 minutes. Didn't need to adjust temperature. So sink in use straight away.
Date published: 2021-10-30
Rated 5 out of 5 by from Blending value Easy to order . Easy to fit and adjustable . Reliable and good service as always from newmarket store .
Date published: 2021-06-17
Rated 5 out of 5 by from Pegler mixing valve Quality product use before would use again thank you s rewfix
Date published: 2020-12-10
Rated 3 out of 5 by from Works half as good as should The pegler tmv works as it should, in regards to mixing hot and cold water at a desired temperature. However the built in check valves fail, I have fitted about 20 of these and only after a few months I've had to fit additional single check valves to about 5 because of the inbuilt check valves just not working. Would recommend fitting check valves when installing to prevent having to return a few months later
Date published: 2020-11-12
  • y_2022, m_9, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_GB, sid_96288, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 15ms
  • REVIEWS, PRODUCT

Use on Dishwasher supply

Can I use this to supply a dishwasher. I have large amounts of hot water from solar. Can I use this to mix water to supply my dishwasher as it will heat the water to over 50 degrees anyhow. Also will it still allow flow if the hot water is cold ?
Asked by: 22Lr
The PEG402 is not designed for use on solar systems and the incoming hot water to the valve would need to be 55-65 degrees C in order to function correctly. I have included the link below to our installation and commissioning instructions but my view is that it is not suitable for your application. The valve needs both hot and cold water running to it in order to function. https://www.pegleryorkshire.co.uk/MEDIA/DownloadAttributes/CC_008/92022803_Peg402_installation_instructions_19.pdf
Answered by: Pegler Yorkshire
Date published: 2022-08-26

Can this TMV be installed upside down?

I want to have a shower outlet going straight up from the TMV outlet to a manual on/off valve and from there up again via 1/2 inch pipe to a goose neck and a shower rose. Thanks.
Asked by: MickMin
Hi The blue cap on the TMV would be installed at the bottom. Please refer to installation instructions and TMV2/TMV3 guidelines to ensure suitability. Following link will give you access to installation instructions for details on min/max pressure and commissioning etc https://www.pegleryorkshire.co.uk/EN/Brands/Pegler/Thermostatic_Mixing_Valves/Thermostatic_Mixing_Valves/product/PEG402_Thermostatic_Mixing_Valve
Answered by: Pegler Yorkshire
Date published: 2021-11-05

Can a TMV that operate successfully with a 5ºC delta T and which will also fail safe at these lower temperatures.

If we would like to set the DHW to 50ºC but still get 45ºC at the bath. Can the TMV operation with failsafe with a ΔT of less than 10ºC?
Asked by: MarcusNg
The DHW going into the valve needs to be at least 10 degrees hotter than the required blended water in order for the valve to operate correctly. Stored DHW must be above 60 degrees to prevent risk of legionella, the PEG402 is designed to return this hot water back to a temperature that is safe for bathing.
Answered by: Pegler Yorkshire
Date published: 2022-05-22

Can the temperature be adjusted?

It says it's pre-set to 43 so I assume so but would just like to double-check that it can be lowered?
Asked by: MMassoud
The range of available temperature adjustment is 35°C to 48°C BUT the temperature that you are allowed to set it to will depend on the application. For example a TMV3 maintained valve on a basin is 41°C and on a bath is 44°C. It is also worth mentioning that the hot inlet temperature needs to be at least 10°C higher than the required mixed temperature. Full installation and commissioning instructions are on the following link https://www.pegleryorkshire.co.uk/MEDIA/DownloadAttributes/CC_008/92022803_Peg402_installation_instructions_19.pdf
Answered by: Pegler Yorkshire
Date published: 2022-04-19

Would this be suitable to control the temp on the flow to a single room (10m2) underfloor heating?

I am looking at putting down 10mm pipe as the underfloor heating and connecting it to the existing central heating system, as its less then 15m2 doesn't normally require a manifold, but I need to restrict the temp the water will flow into the floor?
Asked by: HomeDIY999
Not really, this valve is designed to prevent scalding from a basin or bath tap (or bidet) at point of use. I think (but please do not take this as accurate) that you may need a tempering valve which is similar but not the same. I would suggest contacting an underfloor company.
Answered by: Pegler Yorkshire
Date published: 2022-01-16
  • y_2022, m_9, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_GB, sid_96288, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 24ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Bar Pressure 0.2-10 bar
Brand Pegler
CE Standard (Tested to EN...) BS EN 1111, BS EN 1287.
Manufacturer Guarantee 2 Year Manufacturer's Guarantee (T&Cs Apply)
Model No PEG402
Pack Size 1
Pieces in Pack/Case 1
Product Diameter 15 mm
Product Type TMV
Temperature Range 38-46 °C

Product contents

TMV body and assembly fittings.