Moretti Modena Designer Radiator 578 x 600mm White… (4773G)

£ 241.99INC VAT
Was £268.99 Save £27.00 (10%)

Add to basket for...

Delivered by our approved supplier, find out more

Delivered by our approved supplier, find out more

Moretti Modena Designer Radiator 578 x 600mm White 2211BTU (4773G)

Unfortunately this product cannot be delivered offshore.

Stylish and versatile horizontal radiator. Sturdy steel construction and a high heat output. Easy to handle and install. Contains a welded centre support in the middle of the product.

  • 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • 2211BTU 648W
  • Brackets, Plug & Vent Included
  • Horizontally-Mounted
  • Contemporary Design
  • Epoxy Polyester Powder-Coated Steel Construction
  • Number of Pipes/Sections: 8
  • Suitable for Central Heating Systems
  • Manufactured in the UK

More Info

View all: Moretti Designer Radiators

£241.99INC VAT
Was £268.99 Save £27.00 (10%)

Add to basket for...

Delivered by our approved supplier, find out more

Add to saved list...

Save
Rated 5 out of 5 by from Good radiator, easy to fit Second of these bought recently to gain more wall space in different rooms. Good heat output and easy to fit, with level brackets (some cheaper radiators have brackets not quite level, making it near impossible to install properly vertical)
Date published: 2022-03-22
Rated 3 out of 5 by from Warning - Solid single panel radiator and easy to mount and adjust but be warned - the unit came from the factory assembled upside down! The pre-installed valves and caps, along with the red sticker indicating which side had the internal baffle were reversed out of the box - meaning half the radiator was cold once installed After stripping it off the wall again, we manually checked the baffle location (by poking a length of wire inside) only to locate it half way between the valve plugs on the opposite side than indicated by the sticker and pre-fitted valves/caps. Turned the Radiator through 180°, reinstalled all the fittings on the correct side, removed the misleading sticker and remounted everything - all works great now. Just watch out for this issue if you buy one and have uneven heating.
Date published: 2021-12-01
Rated 5 out of 5 by from Eye catching feature in the ro Lovely feature in the living room and because of the vertical construction, it doesn't just warm the back of the settee up! Would definitely recommend.
Date published: 2021-05-13
Rated 5 out of 5 by from Great looking radiator! Bought this to replace an old run of the mill radiator, looks great on the wall and does the job perfectly. Make sure you eat your Weetabix before attempting to hang it on the wall, or get someone to give you a hand!
Date published: 2021-05-13
  • y_2022, m_10, d_2, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_60
  • loc_en_GB, sid_4773G, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • REVIEWS, PRODUCT

please send the distance between pipe centers

Asked by: LisaDBS
Dear Customer, Vertically the distance is 538 mm. However, if the question is referring to horizontal distance between pipe centres then that would depends on the type valve that you choose to use. Best regards
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-09-30

what's the distance between pipe centers?

Asked by: LisaDBS
Dear customer, Vertically the distance is 538 mm. However, if the question is referring to horizontal distance between pipe centres then that would depends on the type valve that you choose to use. Best regards Best regards
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-09-30

Is this radiator suitable for same end connection

Is this Morretti Modena Designer Horizontal Radiator 578 x 600mm 2211BTU suitable for same end connection ( top and bottom)
Asked by: GeorgegDIY
Dear Customer, No, It is not suitable for top and bottom connection same end Best regards
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-09-30

Orientation & TRV

Hello, my builders fitted this radiator with both connections on the bottom (TRV bottom right) & baffle sticker at the top. Is this ok?
Asked by: Jack808
Dear Customer, If the TRV header is at the bottom then the baffle sticker should also be at the bottom. So please ask your builder for amendments. Best regards
Answered by: BARLO-MORETTI-DESIGN
Date published: 2022-09-30

Are there baffles between the front and back panelss

Asked by: GeorgegDIY
Hello, Thank you for your enquiry. Please see the following reply from the supplier: Yes there is a baffle in one of the headers. There should be a sticker on the header which contains the baffle. If the sticker is not present, there are two ways to check which header has the baffle prior to install 1) the header will have etching ( with some numbers) visible under the paint work. 2) Run a thin wire in the connections from on end of the header to the next. The header with the baffle will stop the wire. Hope that helps. Thank you for using Q&A.
Answered by: Screwfix778
Date published: 2022-07-01
  • y_2022, m_10, d_1, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_169
  • loc_en_GB, sid_4773G, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Moretti
BTU 2211 BTU
BTU Band 2001-3000
CE Standard (Tested to EN...) EN 442.
Connection Size ½ " BSP "
Construction Material (Plumbing) Steel
Delta T Delta T50°C
Manufacturer Guarantee 5 Year Manufacturer's Guarantee (T&Cs Apply)
Max. Working Pressure 4.0 bar
Max. Working Temperature 95 °C
Model Name Modena
No. of Radiator Profiles Double
No. Of Sections 8
Orientation Horizontal
Pack Size 1
Parent Colour White
Pieces in Pack/Case 1
Power Output (Watts/Kw) 648 W
Product Height 578 mm
Product Type Designer Radiator
Product Width 600 mm
Projection from Wall (Std Bracket) 99 mm
Radiator Accessories Included Brackets, Plug & Vent Included
Radiator Coating & Finish Epoxy Polyester Powder-Coated
Radiator Colour White
Radiator Height Band 300-599mm
Radiator Water Content 5.6 Ltr
Radiator Width Band 501-700mm
Suitable System Suitable for Central Heating Systems
Test Pressure 5.2 bar
Total Product Weight 16.18 kg
Wall to Centre (Standard Bracket) 60 mm

Product contents

Radiator, plug and vent, wall brackets and anti-vibration clips. contains a welded centre support in the middle of the product.

Downloads

Instruction Manual

Delivered direct from our suppliers in the number of working days stated on the delivery button

Direct from our supplier delivery restrictions

Geographic restrictions apply, check your postcode below to see if any apply to you. For some locations delivery may take longer than the specified delivery time, and we can not currently offer delivery to offshore addresses.

Please ensure we have your mobile phone number when you order so we can keep you updated with deliveries.

Returns

Please note - If you wish to return this item you will need to call us on our freephone number 03330 112 112 to arrange a free collection.

DELIVERED FROM OUR APPROVED SUPPLIERS - FAQS

Were we able to answer your question? If not, please Contact Us.