MK Logic Plus 10AX 2-Gang 2-Way Light Switch White (16201)

£ 3.36INC VAT

Add to basket for...

MK Logic Plus 10AX 2-Gang 2-Way Light Switch White (16201)

  • Raised Slim Profile
  • Screwed Faceplate
  • Requires 16mm Back Box
  • Angled In-Line Terminals with Backed-Out Captive Screws
  • Rocker Switch
  • Suitable for Mains Voltage Lighting

More Info

View all: MK Switches

£3.36INC VAT

Add to basket for...

Add to saved list...

Rated 5 out of 5 by from Good Quality Product Replaced a similar item. Seems good quality. So far so good
Date published: 2022-05-16
Rated 5 out of 5 by from So far so good. Replaced an MK 2-Way light switch in our kitchen which was 20 years old and had had a lot of use over the years. Used like for like to make replacing easy. Feels decent quality-wise so far but will see if it lasts as long as the predecessor!
Date published: 2022-04-07
Rated 5 out of 5 by from Another good product Bought to replace an old brass faceplate. Good kit at a good price. Collected within an hour of ordering. Can’t really comment on reliability.
Date published: 2022-04-06
Rated 3 out of 5 by from Light switch I found that they looked good and did the job but not satisfied with the terminal connection as the wire kept slipping out and not secure as should be. Was a complete footer to insert and tighten up. Not convinced that the wires were properly secured.
Date published: 2022-02-24
  • y_2022, m_6, d_27, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_215
  • loc_en_GB, sid_16201, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms

screws don't hold wires inplace

why don't the screws, when fully tightened into the terminals not hold the wires in place?
Asked by: dydiy
I would suggest that either the terminals are faulty or the cable is not adequately in place when the screws are tightened. Have a look in the terminal to see if the screws tighten fully.
Answered by: Jaretbrand
Date published: 2020-11-03

To install the wires does the grey cover need to be removed

Asked by: coleman34
Good morning, Could you be a bit more specific are you talking about the outer sheath of the cable? or a grey cover on the product. If you could send some photos of the item you have bought and the grey cover you are talking about to then we will be able to advise. Unfortunately with the information you have currently provided I am unable to assist.
Answered by: MK Electric Tech Support
Date published: 2020-10-17

Why are the screws so tight?

I bought a load of these. About a 1/4 of them went on fine, but one or other of the screws in 3/4 of them are so tight that they won’t move, cannot be tightened, so don’t clamp onto the wires. Is this a faulty batch or am I doing something wrong?
Asked by: McDave
Same here. Just bought the one switch, but had to very carefully tighten the screws (on a work bench) then back them out to clear (or maybe even cut) the threads.
Answered by: Cumbrialad
Date published: 2021-01-28

Replacing old double light switch as 1 and 2 way lights

replace broken switch with a new one. Switch used as 1 way for outside light and 2 way. Removed cover of old switch and old colour coding. Red, yellow and blue wires. Do you have a simple diagram of what goes where for the new switch .
Asked by: Daymerman
Have a look at how all of the original terminations are labelled and record or take a photo of what coloured cables are connected where. Then see if the new switch corresponds with the original switch's labelled terminals and see if you can work out what cables go where.
Answered by: Jaretbrand
Date published: 2020-12-18

Can this be used as an intermediate switch?

If not do you sell 2 gang intermediate switches?
Asked by: Mickmc85
I had the same requirement. I bought a 1 gang intermediate switch and swapped the actual switch mechanism over into one of these. They dismantle relatively easily.
Answered by: jw24
Date published: 2021-06-16
  • y_2022, m_6, d_27, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_GB, sid_16201, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 9ms
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Amp Rating 10 AX
Brand MK
Fixings Supplied Fixings Not Supplied
Insert Colour Without Inserts
Manufacturer Guarantee 1 Year Guarantee
Min. Back Box Depth Required 16 mm
Model Name Logic Plus
Model No K4872 WHIS3
No. of Earth Terminals 0
No. of Ways 2 Way
Number of Gangs 2 Gang
Pack Size 1
Parent Colour White
Pieces in Pack/Case 1
Power Voltage Supply 230 V
Product Type Light Switch
Screwed/Screwless Screwed
Smart Compatibility Not Smart
Switches & Sockets Finish Plastic
Switches & Sockets Product Type Light Switch
Switches & Sockets Profile Type Raised Slim
Switch Operation Rocker
Switch Product Type Light
Terminal Capacity Terminals accept up to 6mm² cable


Instruction Manual