4 black spacers?
There are 4 black spacers clipped on the rad where the brackets go. Are these supposed to be removed or left on? I’m not sure if they’re just for packing or to hold the side panels.
Asked by: Foreleft
They protect the radiator during transit and should be removed upon installation
Answered by: Kudox Support
Date published: 2021-10-23
Radiator
What is the measurement between the centre of the brackets please?
Asked by: TobyPlumbing
The distance centre to centre of the brackets of this radiator is 966mm
Answered by: Kudox Support
Date published: 2021-10-04
Kudox 1200x600 radiator - Top plug seems to be fitted and I cannot get off
The top plug seems to be sealed and so I left it in place, however, as soon as I added water to the system it leaked. I cannot work out how I am supposed to remove it and replace with the blank plug.
Asked by: Tewkes
We recommend to remove it using a big flat head screwdriver (10mm or more) and turning it anti clockwise
Answered by: Kudox Support
Date published: 2019-05-09
Minimum offset from wall
Hi, I need to fit to existing tails in a tiled floor - what is the minimum offset from the wall to the pipe centres on a type 11 rad please?
Asked by: Loguey
It is 50mm
Answered by: Kudox Support
Date published: 2018-08-25