Honeywell Home Evohome Wall-Mounting Kit (2753H)

£ 46.99INC VAT

Add to basket for...

Honeywell Home Evohome Wall-Mounting Kit (2753H)

Wall-mount backplate and transformer for the Honeywell Home Evohome Wi-Fi Thermostat. Provides placement in the optimal location and keeps the thermostat charged.

More Info

View all: Honeywell Home Wireless Thermostats

£46.99INC VAT

Add to basket for...

Add to saved list...

Save
Rated 4 out of 5 by from Wireless interference solution The solution to the wireless signal problem is to fit the transformer at the other end of supply cable to the wall mount. So the cable running to the wall mount is from the output of the transformer. Have done this on a few of the installations I have done, as it's not always possible to get the depth required for the transformer. The cable to the wall mount usually comes from the boiler or cylinder cupboard so the transformer can be fitted in a hidden vented box very easily.
Date published: 2021-02-02
Rated 1 out of 5 by from Unreliable product I used EvoHome on stand for couple years but last autumn , during the home renovation and system expands , decide to install the controller on the wall. Unfortunately , over 2 months I notice several occasions , that the controller lost radio connections with receivers,making the smart system ineffective. Over the investigation I found that the transformer located behind the controller create strong magnetic field and badly affect the radio antenna. As only the controller is removed from bracket of 10cm the signal is back to strong. The technical support from Honeywell confirmed that this is the most probable cause for signal interference and best option is to reverse to standing bracket ?! Not worth any money instead all other Honeywell products I have so big disappointment.
Date published: 2020-01-02
Rated 4 out of 5 by from Honeywell progammer wall mount It is expensive for what it is, my preference is that it would be part of the original kit not an optional accessory. Once fitted however it is a tidy solution and I'm very pleased with how it looks. Simple connection in a 47mm back box just needs L and N connections. Not installed long enough to comment on reliability but time will tell.
Date published: 2019-11-08
Rated 3 out of 5 by from Fit for purpose Better and neater than the table stand for the Evohome controller. Expensive for what it is!
Date published: 2015-10-18
  • y_2021, m_6, d_18, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_GB, sid_2753H, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 108ms
  • REVIEWS, PRODUCT

Should the low volage cable be 2 or 3 core?

The transformer can be mounted remotely and a "low voltage cable" run up to 10m to the back plate. I'm guessing this would probably be 2 core, but it would be good to have that clarified.
Asked by: henryvii
As the transformer power cable, the 10m low voltage one also needs to be a 2 core cable.
Answered by: Honeywell Home Consumer Support
Date published: 2018-09-15

Can this unit be hard wired in place of existing room stat

Asked by: Anon124
The ATF600 is a hard wired kit. Unfortunately we cannot advise on the wiring of the existing thermostat since we do not know the exact model.We strongly suggest you to contact a certified installer.
Answered by: Honeywell Home Consumer Support
Date published: 2018-01-14

What depth of back box is recommended for this product?

Asked by: Tiiv
The evohome Wall Mounting Pack requires a 47 mm deep (plastic) single-gang back box to allow the standard installation of this product. If a back box is not available, the Wall Mounting Pack’s Transformer can be fitted remotely.
Answered by: Honeywell Home Consumer Support
Date published: 2018-12-02
  • y_2021, m_6, d_18, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.17
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_GB, sid_2753H, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 98ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Honeywell Home
Central Heating Control Type Control Accessories
Compatibility For the Honeywell Evohome Wi-Fi Thermostat
Manufacturer Guarantee 1 Year Guarantee
Model Name Evohome
Pack Size 1
Pieces in Pack/Case 1
Product Depth 58 mm
Product Height 152 mm
Product Type Wall-Mounting Kit
Product Width 250 mm
Smart Compatibility Smart

Product contents

Wall-mount backplate and transformer.

Downloads

Instruction Manual