Hilka Pro-Craft Manual Grease Gun Set 6 Pieces (4744R)

£ 14.99INC VAT

Add to basket for...

Hilka Pro-Craft Manual Grease Gun Set 6 Pieces (4744R)

Can be filled with cartridge or bulk grease. Compatible with Hilka cartridges. Supplied with cartridge, 10" ½" flexible hose, hose adapter, 7" rigid and 4" ½" connector. Thread fits a 14mm nipple.

More Info

View all: Hilka Pro-Craft Grease

Bulk Save Save up to 10%
Bulk savings
QTY Price per item Saving
1 - 3 £14.99 -
4 + £13.49 Save 10%
£14.99INC VAT

Add to basket for...

Add to saved list...

Save
Rated 4 out of 5 by from Best value grease gun This is a smaller than usual grease gun but for me that is a plus. Works well with two different size heads. Comes with grease filled cartridge which can be refilled.
Date published: 2021-07-28
Rated 4 out of 5 by from Good product Great bit of kit for the price fast delivery very good service
Date published: 2021-07-03
Rated 5 out of 5 by from HILKA PRO-CRAFT GREASE GUN Great product. I have used this grease gun regular and it is really good. good selection of attachments which is good value. I do small projects and have the tools which this gun keeps them up with plenty of grease. well done Hilka.
Date published: 2021-06-29
Rated 5 out of 5 by from Grease gun Brought this grease gun , not expecting too much for the price . I was pleasantly surprised , the 7” rigid flexible hose made the job much easier than it could have been . I found the cartridge easy to install and I’m not a strong woman but it helped the instructions were very easy to follow . Great product for a great price would certainly recommend for that annoying little gob where the big guns don’t fit
Date published: 2021-05-26
  • y_2021, m_9, d_18, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_27
  • loc_en_GB, sid_4744R, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 16ms
  • REVIEWS, PRODUCT

Does this grease gun take the 400m Cartridges?

Asked by: Bezzaboy24
Hello, thank you for the question. This product takes a 3oz (85 gram) load and thus would not be suitable for a 400 gram cartridge. If you require a grease gun suitable for a 400 gram load please review Screwfix code 19235. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2020-05-03

How does this work for bulk and cartridges? Surely the smaller diameter of the plunger that goes through the cartridge would prevent a good seal in the tube when using bulk?

Asked by: Iannnnnnnnnnnn
Hello, thank you for your query. The rubber end of the plunger is reversible, it requires undoing the retaining nut and turning around to change from bulk to cartridge. Kind regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2021-04-29

Greasing long reach hedge cutter

Is this suitable for greasing the titan long reach petrol hedgecutters?
Asked by: BuzzLeeds
Hello, thank you for the question. This product is suitable for a wide range of greasing requirements however unfortunately as i am not the supplier of the petrol hedge cutter i cannot confirm if this would be suitable or not. I would suggest you check the instruction manual for any specific requirements for the greasing points or if that does not work contact the Screwfix customer services helpline which are normally very informative and can provide the assistance needed. Sorry we could not be of more assistance on this occasions. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2019-08-17

replacement Cartidge

which replacement cartridge does this take?
Asked by: billk905
Hello, thank you for the question. This product takes a 3oz Cartridge. We do a replacement set of two Hilka code 84802003 however Screwfix do not stock this or a suitable 3oz cartridge. It can however be purchase easily online. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2020-09-21

How do you measure the nipple size?

Asked by: Greasy
Hello, thank you for the question. I have found the following online which helps explain this: It’s easy to determine which grease fitting thread you have by taking three separate measurements. Measurement #1 – Straight or Tapered? The first step in determining a grease fitting’s thread is to determine if the thread is straight or tapered. This is done by a visual check. Look carefully, a tapered thread is only tapered by about 3 degrees and is easy to miss if you aren’t careful. Measurement #2 – Thread Pitch The number of threads per inch is known as the thread pitch. The best way to determine thread pitch of a grease fitting is to compare the threads to something with a known thread. You can also compare the grease fitting threads to a known bolt thread, pipe thread, or another grease fitting. Place the known thread against the unknown thread. If the two threads engage, the thread is the same. If they do not, the thread is different. Measurement #3 – Thread Diameter The last measurement you need is the outer or major diameter of the thread. A set of calipers makes this an easy measurement to take. Regards, Hilka Tools
Answered by: Hilka Product Expert
Date published: 2021-05-23
  • y_2021, m_9, d_18, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_GB, sid_4744R, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 27ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Specification
Brand Hilka Pro-Craft
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 6
Product Type Manual Grease Gun Set

Product contents

Grease gun, cartridge, 10" x ½" flexible hose, hose adapter, 7" rigid and 4" x ½" connector.

Downloads

Safety Data Sheet (COSHH)