Browse store

Gripfill Adhesive 350ml (10261)

You must be over the age of 18 to purchase this product.

Gives excellent adhesion and bonding strength to most solid building materials. Bonds plasterboard, skirting boards, electrical conduit, stone, ferrous and non-ferrous metals.

  • For Interior & Exterior Use
  • Excellent Bonding Strength Even When Vertical
  • Waterproof

More Info

£2.55INC VAT (£7.29/Ltr)

Add to basket for...

Gripfill Adhesive 350ml is rated 4.6 out of 5 by 299.
  • y_2017, m_10, d_19, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_299
  • loc_en_GB, sid_10261, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from It's Gripfill innit?! Sticks stuff and fills gaps at the same time. Marvelous!
Date published: 2017-10-02
Rated 5 out of 5 by from Perfect adhesive Great universal building adhesive, used it to bond plasterboard to old brickwork prior to plastering - perfect.
Date published: 2017-09-29
Rated 5 out of 5 by from Does what it says I needed to fill some holes between the bricks and the facia boards to stop bees entering. This product was perfect for the job and made a neat finish when smoothed with a putty knife.
Date published: 2017-09-20
Rated 5 out of 5 by from Works first time So long as you are constantly using this glue over a short period of time .... it is really good.
Date published: 2017-09-11
  • y_2017, m_10, d_19, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_299
  • loc_en_GB, sid_10261, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Can thus be used to stick down felt shingles?

Asked by: Emmellar
The Evo-Stik Gripfill Grab Adhesive is a solvent based rubber resin product that can bond to many different materials including metal, wood, concrete, brick and plaster among others. Whilst the product can be used in suitable exterior applications if the bond line is protected from water or moisture ingress, it is not suitable for bonding felt shingles at all.
Answered by: Bostik Product Support
Date published: 2017-10-09

Can you use gripfill grab adhesive to stick tiles to steel plate

Asked by: Willywally
The Gripfill Adhesive is a solvent based rubber resin adhesive.The product is not designed to be used as a tile adhesive as such although it is likely that a bond would be achieved if the back of the tile is porous although ultimately the bond strength will depend on variables such as the total bond area against the load, the type of steel and the type of tile. Outside of this the adhesive does not provide a solid bed behind the tile in the same way as a tile adhesive and so if it is on a floor the voids underneath will mean that the tile will crack when stood on. If it is on a vertical then as it will take 24 hours to fully dry it will need supporting during the drying time which may not be practical. Consequently the product is not recommended for this particular application.
Answered by: Bostik Product Support
Date published: 2017-09-19

Will this glue brick slips vertically to wire mesh?

Asked by: Smartik
The Evo-Stik Gripfill Grab Adhesive is a solvent based rubber resin product that can be used to bond various materials such as wood, metal, plaster, concrete, brick and some plastics. However the product is not specified for bonding brick slips in general and not to wire mesh in particular as the bond area will be very small.
Answered by: Bostik Product Support
Date published: 2017-09-13

Can this product be used to stick wall tiles to plasterboard. Tiles are small 100mm x 200mm

Asked by: Pal1
The Evo-Stik Gripfill Grab Adhesive is a solvent based rubber resin adhesive that can be used to bond to various materials including wood, metal, plaster, plasterboard, concrete and brick among other materials. However the product is not designed as a tile adhesive and so it is not recommended for such an application for a number of reasons, These include the fact that the application will need supporting during the drying time which will not be practical as the drying time is 24 hours and the adhesive does not provide a solid bed of adhesive behind the tile as a tile adhesive would as the product is bead applied.
Answered by: Bostik Product Support
Date published: 2017-09-07

Will this stuff stick polycarbonate to roof tiles?

I'm looking for something to stick bird spikes with a polycarbonate base to the roof ridge.
Asked by: StigofTheTip
The Evo-Stik Gripfill Grab Adhesive is a solvent based rubber resin adhesive that can be used for bonding many different materials such as plaster, brick, concrete, wood and metal as long as one of the materials being bonded is porous, However the product is not suitable for bonding polybarbonate and if it is used in an exterior application, the bond line needs protecting from water or moisture ingress as the product is not waterproof. Outside of this it is not recommended to bond above head height by the adhesive alone for safety reasons.
Answered by: Bostik Product Support
Date published: 2017-09-07
  • y_2017, m_10, d_19, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_47
  • loc_en_GB, sid_10261, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Gripfill
Colour Beige
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Type Adhesive
Sealant Adhesive Volume 350 ml
Suitable Application For Interior & Exterior Use
Volume 350 ml
Water Resistant Waterproof

Hazardous - Delivery unavailable for any offshore location.

Downloads

Safety Data Sheet (COSHH)