FloPlast Push-Fit Air Admittance Valve Grey 110mm (78150)
Allows the free entry of air into the sanitary pipework system without the foul gases escaping into the building. Avoids the need to penetrate outer roof shell. It is recommended that air admittance valves are not used externally as environmental debris will affect the air tightness performance of the valve. Push-fit connection. Remove seal from 110mm push-fit for 82mm solvent connection. Tested and approved for use in installation varying between -20° and +60°C (no insulation required). can be installed below the flood level of connected appliances. FloPlast are the first company in the world to be awarded the Kitemark for Air Admittance Valves.
- uPVC Construction
- Push-Fit Connection
- 42.3Ltr/sec Air Flow Capacity
View all: FloPlast Soil Pipe Fittings
You may also like:
| Specification | |
|---|---|
| Air Flow Capacity | 42.3 Ltr/sec |
| Brand | FloPlast |
| CE Standard (Tested to EN...) | EN 12380, KM 512474. |
| Colour | Grey |
| Construction Material (Plumbing) | uPVC |
| Drainage Pipe Product Type | Air Admittance Valves |
| Drainage Section | Soil & Vent |
| Manufacturer Guarantee | 2 Year Manufacturer's Guarantee (T&Cs Apply) |
| Model No | AF110G |
| Pack Size | 1 |
| Parent Colour | Grey |
| Pieces in Pack/Case | 1 |
| Pipe Diameter | 110 mm |
| Pipe Fitting System | Push-Fit |
| Product Type | Air Admittance Valve |